Search results

I just rolled myself a nice IC and I want to put small length of copper tubing up one side, out of the pot, over, and down the other side. Kinda like a handle and soldered to each coil wrap to help hold it in place. Lead free solder is safe for regular plumbing but what about boiling temps? Can...

I am from Hamilton and I usually go to Brew Time on Upper James, they have another store on Centennial that I have not been to. I have also been browsing this website: http://www.homebrew-supplies.ca/viartshop/index.php Located in Brampton. Lots of selection, have not ordered from them...

Man that is slick. Did you weld the inside too? D.

Well thats what I am after, a little more alcohol. I thought that by having a FG at 1.020 and adding a little dextrose the gravity will go up a bit until the yeast munch up the sugar and the FG would now rest lower due to the alcohol. I see what you are saying that the alcohol produced from...

I recently dove head first into brewing a batch of all grain. I used a simple pale ale recipe, modified for 3 Gal. 2.5kg pale malt .5kg munich .100kg crystal Everything went fine as far as processes go, however I realized after that I may have mashed at too high a temp. The digital temp...

If it helps, I just did a test run on our stove with my 5 gallon pot. I filled it with about 4 Gal of roomish temp water and did not get to a boil in 1 1/2 hours. I left the lid on. So, I pulled it off the stove, drained it, wrapped it in foil bubble wrap insulation and tried again...

I have an old aluminum Smithwicks Irish ale keg with the same coupler.

I have a guinness keg as well. Don't worry, you did not screw up. Heres how I did mine: 1. Bleed the pressure off. I did this by pushing a screw driver in the middle and had a rag over top to prevent spray. (My keg was 1/3rd full of old guinness) 2. There is a brass nut with little ramps...

Hi everyone, I have been lurking for months and decided to join. Anyways, I recently became the owner of 2 kegs, one stainless and one aluminum and am in the process of converting them on the "ultra cheap". So I am just wondering what kind of hardware store miracles you guys have put together...