Search results

I never really saw a thread on here that goes in to good detail about this. There looks like a lot of great recipes here on HBT but many have different brewhouse efficiency. How Is the correct way to convert someone’s recipe who has a 85% brew house efficiency to mine that has a 70%. I am...

Try a sulfate:chloride ratio of 110:210 and adjust from there. As you get closer to 250 CL it get a chalk tasting

How much would you ship it to Ohio for my zip is 44280

I have the 20gallon kettle size wilser bag. Any one ever try hoisting it up with 55 pound grain bill plus what ever the liquid absorbed weight is??? I am guessing it would be over 60 pounds. Wilser is the only one I would attempt this feat with but I am still in a little un sure

can you post a link to what chugger pump you have.

I alway read and see people not using hop bags for boiling/whirlpool pellet hop additions. I hear you get better hop utilization without using hop bags. I have never tried adding the pellets directly to my wort of my electric kettle. what’s the best practice to keep the Trub out of your...

I am from Valley City(just outside of Brunswick). Between Cleveland brew shop and Hop & Vine I like hop and vine the best so far. Both have great service and friendly peps, just Hop and Vine is closer and has more of a selection and also they stock more quantities. Last brew i had to go to both...

I use a false bottom from brewhardware.com just for biab and for my first ebiab kettle batch I have no complaints. Just make sure you have enough water above your false bottom to accommodate your grain bill

Thanks for the help. Awesome looking kettle by the way!

I just did my first batch (still fermenting) using my new electric kettle. Its on a 20 gal kettle and i used 8 gal for strike with 21 lb grain bill. It was a thick mash due to me false bottom sitting up at the 4.5 gal line. I recirculated the entire 60 min mash. I am thinking about lowering the...

Has anyone had any success using one of these controllers for a 120v EBIAB setup with a 1650w element. The specs say it is good up to 1800w. Let me know your thoughts. Otherwise i may just go with shelling out $100 for the INKBIRD IPB-16. Here is the link to the controller...

I will be drilling the kettle holes and installing the heat elements myself. I will get a false bottom also before I drill the hole for the elements so I can adjust for the mounting height. I was thinking of mounting them at the mid point between the bottom of kettle and top of the false bottom...

Due to my new brew room setup i am stuck with 3 each 120v/15amp circuits to work with. So its time to buid something that will work with what it have. This will be the first equipment added to my new electric brewery. I am making a DIY eBIAB 15 gallon kettle. I have a 7.9gal fast-ferment so i...

I am almost in the same stage planning my first ekettle. Here is what i am thinking of putting together to boil up to 10 gallons of water for BIAB. 15 gal kettle with 2ea- 1650w ULWD elements and one plugged into a temp controller. This will be on two 15amp circuits. Will this have enough power...