Search results

Cold beer, beer cold bottles, I have been through the entire " We dont need no stinking beer gun" thread.

Oh yeah i tried everything. So low it would barely climb the hose into the bottle and everything in between.

I have been bottling beers from my cornies for a couple of years now and I have never had the problems that I have been having with this beer. I am using a picnic tap with the racking cane method. What happens is that on the first bottle it starts out ok and about the time it gets to half full...

when I go from one cornie to another I do it from out to out. Like you said no splashing and not open to the air.

Hmm I will have to try AC next time. I can set freq, balance, HF start, the whole works, and I am pretty sure the Clay9_24s machine can do this as well. Any recommendations on settings?

I weld copper with DC. Just used some copper ground wire from some romex for filler. It works pretty well.

I used about 1.5 pounds of honey in that recipe mainly to bring the gravity up. Plus i increased the centenial and cascade a little and dry hopped with 1 ounce if citra whole hops for 7 days. Turned out great. My most popular beer so far. I had the honey sitting around but next time I think i...

Where I live the cost of brewing a batch using electric is about 1/3 to 1/4 that of propane. Electric is faster and I can be inside warm and dry or cool and bug free.

My first 3 batches got the water sucked back into fermenter through the blowoff tube before I figured out how not to leave enough water to fill the tube. And to pull the tube from the top of the carboy first not the jar of water. They were all fine.

I would be happy to cut your keg if you could get it down here to Greensburg. It would have to be on the weekend I word long hours during the week. I cut mine with a plasma cutter but would use a grinder next time as it left some discoloration on the sides of the keg that is really hard to...

Thanks!!! You got me started on a youtube marathon of useless machine videos.

Ok so i just brewed a weeheavy and this time of year the temp swing above and below my desired ferment temp of 60. Of course I didn't think of this until i had it in the fermenter and was setting my single stage controller. I had ordered the two stage one a while back and it has been setting on...

Holy cow I just spent 30 minutes searching and only found those 300+ dollar breakers. I would seriously consider replacing the panel.

A spa panel should have a gfci in it so you can use a regular much cheaper breaker in the main panel

I normally dont like beer with fruit and other things in it but i had some with chamomile in it and it was surprisingly good.

Had to watch that totally straight. Was already being randomly tested by the time that came on tv. Ok maybe hungover.

Wake and bake meant something totally different than oats in the old days.

I have heard its bad for copper to be in contact with fermented beer. But stainless is used all the time in this manner in larger fermenters.

Some hair dryers can pull a lot of amps, and aren't really meant for continuous use although if set on low you probably wont have a problem, I have melted a hairdryer using it for an extended time on high. I use a small electric heater set on low (750 watts) works great. This time of year you...

I did a 22 pound grain bill on a 10 gallon batch in my keggle. Worked fine although I did scoop out some of the grain and put it in a separate bag to make it easier to drain and squeeze.