Search results

I am listing for sale my keezer build, works perfectly just too big my basement and the few kegs I typically have on tap. Freezer Size - 61.5 27.5 - This should be able to easily hold eight to ten corny kegs. 10lb CO2 Tank - Should be almost full Four Shanks, Faucets (Not Perlicks) Three...

It looks like the item is sold. Thanks for all the interest.

Hello In accumulating pin lock kegs I might have gotten carried away and ended up with ten of them so in anticipation of an upcoming move I was going to send five off to a new home. All are in great condition but they are also used 5 gallon soda pin lock kegs. I am including in the sale...

Thanks for all the interest It's been sold

Sounds great, send me a PM with your address and I can drop it in the mail tomorrow unless you happen to be local. I will PM my email for PayPal

http://www.dudadiesel.com/choose_item.php?id=HX1230BWGH I am listing for sale the above chiller, lightly used and all my hops are filtered out using the stainless brewing basket. Always flushed and thoroughly cleaned. This is the version with the 1/2 barbs. Upgrading to a bigger version...

Not mine This seems like a deal at $35, full. Never heard of a 17 lb version before. http://hartford.craigslist.org/bik/3744277284.html

I will take them if you can send me a PM with payment info.

I put together essentially my first yeast starter last night using 2 cups of DME and 1800 ML of water in a 2000 ML flask with a stir bar. All was looking good, went out for a few hours and come back to a mess on the counter this afternoon. I was trying to make a big enough starter for a...

Looks like I missed the group buy but would definitely be in for a few bags when this starts up again.

Checking in from Somers, CT I just survived an electric brewery build in my basement and have a few different beers in the fermenter. If anybody was goegraphically nearby and interested in meeting up that would be fantastic. Still learning a lot and this forum is incredibly helpful...

My SSR and heat sink are almost the exact same size so it was a challenge to cut the hole so that the SSR could make contact with the heat sink but yet the heat sink could stay on top without falling into the panel. I keep fixing it but eventually it just falls down slightly. In hindsight I...

That's exactly what we did. We tried resoldering it with no success (that is thin wire) and then replaced the coil from a 40 AMP contractor which worked perfectly. I assumed that was ok because both contractors were 120 v.

I love the Flash Gordon reference. Not sure if you have seen it but you have to watch Ted. I do need better labels though.

It was quite a process and there are a few minor items still to do but everything works as it should. My initial thought was to put the brewery in the garage but we had an empty room in our finished basement that seemed a better fit. We had an unused 50 AMP GFCI breaker froma hot tub so I...

In the photo you will notice the connection in the middle (white part) that my switch wires would be connected too, somehow that was twisted when we placed it in the control panel. When that happened it severed the connection between those two prongs and the copper coil. Is there a better...

Thanks for the insight, we correctly wired the neutral but somehow damaged the 50 AMP contactor. The coil connection on the contactor appears to be very fragile and the thin wire connecting the terminal to the coil separated. I might be buying another contactor unless I can solder it back...

I am almost finished the never ending 50 AMP electric brewery project. In finishing the wiring I was a little confused as to how to wire the neutral. Do I take the white wire from the 50 AMP receptacle and bring that to the neutral bus bar or do I bring it to my two thirty amp receptacles then...

Hello - I am looking for a full set up as well and would like to request a code. Thanks

I apologize if this has been addressed before but I am converting to all electric in my basement and closely following Kal's design. I tried search to no avail I have a 50 A GFCI available that was previously used for a hot tub. It is in the perfect spot and the GFCI breaker should...