Search results

I typically leave the gas CONNECTED at 30PSI at 34F for 2-3 days depending on the carb level desired. I do cold crash in a mini fridge and pressurize the keg to 30psi, then disconnect. the beer in the minifridge is never carbonated even when absorbed to 5 psi. i burst back to 30 PSI every...

Looks good!

I have two of the ones you linked - both work great - upon buying the 2nd plate, I had to have amazon replace it because it did not work out of box. I have had one of them for 1.5y and the other for probably 8 mo. they do not take the very large flasks and sometimes kick the stir bar but...

you should be fine with fermenting up to 9g without issue in a 10g keg

for a 10 gallon, you could prob do 8-9 gallons. def 9 if you use femcap and keep under pressure edit - i do about 4.5g in 5g ball lock kegs w/o femcap

I only set to 1-2 psi to keep positive pressure in the keg - are you sure your blow off tube is air tight? some yeast also take a few days to kick into gear, even on a yeast cake. not ideal but I have experienced lag time like that before. You can also under pitch as suggested above to bring...

Craft: Cold Smoke by Kettle House in Missoula MT

thank you!!! im in!

you can make your own - i have 8 of these: Corny Gas QD red kegorator Gas Line brass threaded T Brass threaded hose barb for T PRV, adjustable Pressure gauge, preferably oil filled Gas teflon tape worm hose clamps all the above can be ordered on amazon assembly: assemble gas QD, and worm...

There Does Not Exist's Vague Future is a wicked good black IPA/CDA if you can get your hands on it

Black IPA is my jam - my favorite IPA style - you should brew it with Cascade if you're going true CDA. Piney, with very slight roast My house Black IPA/CDA: 59.5 IBU 6.1%ABV SRM 39 61.5% Pils 23.1% 2row 7.7% Caraf II or III - Dehusked if you can 4.4% Victory 3.3% 40L Hopping for 4 gallons...

10.5 runs

For stainless - a "loose handled" 5g ball lock used costs 27.99 from AIH - i have 14. out of all of them, only 1 truely has a loose handle. the rest have a chunked handle or bottom, maybe a 1"x1" chunk

Gas QDs are not airtight when not connected to a keg - trust me on this

I BIAB as well - which i rinse with hose and occasionally wash vigorously in a bucket of PBW then rinse. since you BIAB is hot side - just make sure you dont get mold Brew - finish brew - hose everything out - PBW - scrub w/ layered paper towel or cloth (prevent scratching) - hose out - Star...

you have a leak - if you had the gas shut off at the hose barb, close your tank now as well - if you have a leak it will be zero in the morning, but you wont drain your tank. you will prove if you have a leak or not in the gauge or tank connection. if the pressure holds, you do not have a leak...

I second the Cascade and Centennial - Bitter with Centennial and then Cascade all the way!

i am in the same boat - do not think were getting the hops because they use the infamous "while supplies last"

We are pushing customers to 1/2022 and 2/2022 on new installations on certain systems - chronically short on repair parts - suppliers factories are shut down or 1/2 capacity

I echo this - At work we have product sitting in containers on several of the 70+ ships sitting outside the port of long beach/port of LA. crazy - had a beer at Riip out in seal beach and it looks like a parking lot. never have seen anything like this. were almost at a 4 month lead time to get...