Search results

https://www.dropbox.com/sh/igkch19thwd64ey/AAD-zhH3DVBf40kdF5Y3loLFa/PCB?dl=0 The GTO PCB is what I am using https://github.com/ArdBir/Open-ArdBir/tree/master/Open-ArdBir Using this code then modified the PCB original to match up with the Chinese Nano I will setup and post Google Drive with...

I used the original board I printed and reversed the heater diode. Then just used my uno and held the wires to the circuits it works. So I don't have something right on bread board.

Here is board version 2.0 (since my original version I destroyed) A little coat of lacquer to keep the toner transfer from rubbing off.

I changed the "board".h file for the correct pin out on the Chinese Nano

Back to working with bread board to find my error. I am trying to get the heater to work. Here is what I have thus far. Here is the PCB diagram I can get it to light the LED if I apply power to the resistor on row 16. Remove power and connect the heater output from nano, turn on heater...

So decided to stay up and watch the election last night. While listening to the TV I soldered everything to the board. That was a learning experience, I have done some soldering here and there nothing like this. Here is what I learned. 1. soldering iron was to hot 2. used the wrong tip in...

My PCB arrived today here is what I was able to get done. Cut out of a larger 12x12 piece using my tile saw. Roughed up surface with a green scrubbing pad and cleaned with acetone. Bought PCB transfer paper to do the job. As a side note, don't use scotch tape to hold the paper down. It...

I already have an automated 16g Brew Boss system, which is awesome. I am a tech person and love learning; so in turn I tinker, challenge 1 build a PID system (done), challenge 2 build a Arduino system, heck by this time next year I'll have a PI system or use PI to control my Ferm chamber. In...

I realized in tinkering with the "prototype" that my resistor to the display was to large and causing the display to be to dark. I miss read the specs and used a 470k ohm resistor instead of a 470 ohm. That's why it's on bread board first.

Good to know. Thanks for the info.

Has any one attempted to use Peltier cooling for their SSRs?

Wired it all up on breadboard to test. Just using LEDs to test heater and pump out put. Now to attempt making the PCB. May go with the green/black LCD. Not liking how difficult the blue/white is to see.

Any one know where I could find the user manual or a menu map? There are a bunch of links to the same dead Dropbox.

After harvesting and building up to a 1L starter, I am thinking the yeast is the Czech Pils. It has more of the Lager funk smell to it than aromatic ale smell.

When I was trying to obtain some PacMan I picked up 3 bombers of Rogue Irish Style Lager. On the bottle it is printed that it uses PacMan yeast, however if you read on Rogue's web site it says its a Czech Pils yeast. Anyone have any idea which yeast it is? My plan is to harvest it, try a...

It is a very good light lager. My family is BMC type bunch tried all kinds of blondes, creams, kolsches, lagers to feed their beer appetite. They have downed this recipe like crazy, they come over just to grab a beer now. Recipe Specifications -------------------------- Boil Size: 12.59 gal...

Update....added the enzyme to one and it dropped to 1.0 the "control" fermenter stayed at 1.003. The taste difference is not even detectable.

Not long ago I built a BrauSupply Clone system. I am going to convert it into an automated system using Open ArbBir and a Arduino Nano. BrauSupply Clone w/12v pump https://www.homebrewtalk.com/attachment.php?attachmentid=375665&stc=1&d=1478032600...

Awesome...thank you. Found A Liebfraumilch kit going to give that a shot.

My grandmother who was born and raised in Germany has asked me to make a german wine. The only kits I can find are for a Riesling, which would be okay. I would like to make something more like a Rhine Wine. That is what she is really wanting and what she called it. Any ideas, suggestions, recipes?