Search results

I finally received all my components and break out board https://pcbs.io/share/46AR1 I ordered the wrong phone jack connector to attach to the 6 hole place. Can I just solder 3 wires to certain holes to get + - and the one wire signal? if so, which ones do I solder to? ... Row 1 LMR left...

Thank you for all the replies. I have a two roller mill (Barley crusher), what should the spacing be between the rollers?

Does your grain compact against the false bottom?

it is due to the pump valve setting. How fast should I recirculate? The mash is not stuck. I do find that the mash gets compacted against the false bottom. I use 1.25 qts per lb of grain plus 1 gallon for the mash tun dead space, below the false bottom.

I have the MKII pumps that are 5 gallon per minute. not sure if that makes much of a difference.

I have a 3 vessel HERMS system. My HLT is a 15 gallon keg with a 50' stainless coil in it and the MASH TUN is a 15 gallon keg w/ a SS false bottom. I am running two pumps. My question or issue is with the MASH Tun. I find that my grain in the mash tun gets sucked to the bottom of my false bottom...

The 20x4 LCD display that connects to the PC breakout board. Using the level shifter.

Does the current version of Fermentrack support a LED screen? or do you have to download additional code/software for this?

this board Description: ESP8266 Breakout Board for BrewPi - Through Hole /w LCD looks like it has to places for relays to be soldered onto th e board. https://pcbs.io/share/46AR1 Can someone confirm this, and if so what is the relay part #?

Great Schematic, Thank you. This is exactly what I need. I plan to use a 3 position double pole after the main keyed switch. It will turn on the contactor in position 1 or 2 and off in center position. It will also switch the #6 lead coming off the PID's. I dont see a need to disconnect #7 from...

Doug, That makes sense to switch the PID signals to the SSR. I like it. I dont have a schematic, but bear with me for a second. Main power to contactor that is switched on with main power switch. Main power switch turns on both PID's. 3 way selector switch with 2 N/O. (on, off, on) The 3...

Sorry to bring up an old thread, but I am looking to do the same thing. I want to run two PID's. One Inkbird for my HLT and one EZ boil for my boil kettle and have a single cord. Flip the switch from one PID to the EZboil. What I dont understand is why you are blocking the signal to the SSR from...