Search results

I am new to kegging, but my understanding on your questions are: Ball locks have a taller height and thinner diameter to them giving you more room for kegs in a fridge or keezer assuming height isn't an issue. The ball lock kegs also have a pressure release valve which most pin lock kegs...

They are back in stock now, just place an order for 4 more

I get it as well, I belive it is the co2 being absorbed by the beer

Also there is a few inches of headspace in the secondary carboy. Since primary is done is it a big deal that there is Air in the carboy that wont be pushed out by co2? The bung for the carboy kept slidding out of the carboy so i used the ole Canadian solution of duct tape to keep it on. I...

Just racked to secondary ( I am going to try not racking on my wheat beer to make up my own mind on the great debate ) I checked the hydro reading and its right where it need to be after 12 days in primary at 65C. When I was racking a couple of cups spashed at the bottom of the carboy because...

That looks awesome, don't know what would've cause this as I am new but cool non the less

Thanks djsethall! I took apart everything and gave it a clean and put it back together. Everything works flawlessly now. Now back to brewing beer

Hi, I am hoping somebody can give me some direction. I purchased a regulator off ebay and I just hooked it up yesterday with my new 20#. When I increase the pressure over 40psi on the one regulator (its a dual) gas comes out the weep hole and a little form the adjustment screw. I tried...

I haven't used my kegging system yet, but I have seen most people will seal the lid by hitting the kegs with 30 psi for a few seconds. That should give you some good pressure on the lid until the priming sugar kicks in.

I did all full sugar by the book. I was thinking though could you just boil 5 gal of sugar and water and keg it and just add a drop or two of the extract. Also I spilled some of the blue raspberry extract on my hand. and now I look like Chevy Chase off of Vegas Vacation if you know what I mean.

Just made my first root beer with the PM flavours. First time making soda. I am very impressed. Thanks for the info Tom

Hi All, Thanks to everyone who has already given me some great advice. Just started a Festa Brew kit and after only 6 hours it was already fermenting. Plan to rack to secondary after primary then cold crash and Keg (yes I already got Kegs) I will post my progress. What a great site!!!!

Sabco looks good, I got 4 refurbs off ebay for $150 All in. I wish I knew about them as it would be $10 cheaper plus poilished

Thanks Everybody, I love how quickly I get answers that have been racking my brain. Question, judging by the pictures do you think that the regulator has a standard co2 fitting. I don't have the regulator yet, but would like to pick up a tank from Norwood fire extinguisher in Etobicoke and...

Hi, I recently bought a cornelius regulator and was wondering if anybody knows if this would already have check valves installed on it or if there was any way to tell? Also does anyone know where I could buy check valves that would screw into the regulator? here is a link to the ebay...

Thanks Arneba

Hi, I am hoping someone with a keg system can help me. when the gas line to the corny is hooked to gas and the tank and reg are on will it dispense gas without it being hooked up to the corny? The reason I ask is I have a regulator that has 5 ports for air but no shut offs. Any help would be...

I know eh, damn procrastination

It looks like keg Connection has eliminated their flat rate shipping of 7.95, I am getting 29.95 for a 2 keg system now fyi.

Hi, I was wondering if it ok to re use plastic bottle caps for my PET bottles. Should i remove the gasket out of each of them and sanitize or just sanitize them intact? Thanks