Search results

My favorites for hardware are brewhardware (Bobby) and baragainfittings.

I was browsing the Bulk Reef Supply website and the have RO systems and RO/Chloramine systems. I was under the impression regular RO systems removed Chloramine. Is this not the case?

This is why. You can throw the temp corrections out the window if they get too far above the calibration point.

I have the same problem to a certain extent. I believe it all comes down to having less sparge water available to rinse the grains. Sometime I will get around to modifying the FB base so it sits lower.

@rodduley In your case I would use the 25 gal as you BK. I have all keggles and with a 10 gal batch and a 90 min boil I am pushing the limit of the keggle.

If you are putting a HERMS coil in your HLT I would use the 15 gal kettle for that. I have a Keggle for mine and it is a pain in the ass to work on.

Very nice. How does it do on ice efficiency?

Please document this.

I don't believe it does.

Here is a nutritional label for 1 cup of pumpkin. The source is http://nutritiondata.self.com.

I don't have much to add but please update this as you progress. I also have a williams wand and this looks like it could be a good addition to my setup.

I used to use one of these which don't put out any light. I have since switched to a very small space heater. This works better for me because my ferm chamber is in a unheated garage...

If you want to do a step starter take a look at this site. http://www.yeastcalc.com/

I have the pico in my mlt and I just ordered a jaybird and level 3 filter for my bk. The pico seems to perform well. I did trim the supports with an angle grinder to lower the dead space some. With 10 gal batches the deadspace won't cause a problem with 5 gal batches I have to increase the...

Have you seen this thread? https://www.homebrewtalk.com/f51/my-latest-project-walk-cooler-11440/ I have an AC unit with a manual thermostat. I didn't have to bypass the internal thermostat, instead I moved the adjustment screw.

That is a great solution. I just finished my stand and was looking for something like this.

I am almost done with my E-HERMS (leak testing tonight). I have a hop spider but am looking at Jaybird's solutions. @Jaybird How tall would the filter stand have to be in a upside down keg to work with a 15" false bottom?

This is what I use. http://www.amazon.com/Lasko-MyHeat-Personal-Ceramic-Heater/dp/B003XDTWN2/ref=sr_1_6?ie=UTF8&qid=1348496154&sr=8-6&keywords=ceramic+heater I would caution you on using the ceramic bulbs. I had them in mine last winter and I didn't like their performance. I think they would...

Yep

This is sold. Local pickup.