Search results

Hello All, Just finished my new kegerator and intend to install RaspberryPints in the near future (just want to do some more research on the flow meters and decide if some of the cheaper options are worth it) Quick question: would it be possible to use a table as a display instead of a...

Are you planing to use it for fermenting or for kegging? I use my kegs to ferment and got myself one of those keg tops with a hole drilled into it and a bung. I have a 16 in and 12 in thermowell that I put through the bung, into the keg. I then use a gas out post with tubing into some sanitizer...

Thanks for the reply. Totally forgot to think about the mash temp. Based my recipe off of Brewing Classic Styles so I figured it would be safe. Do you think adding amylase enzyme or pumping over to secondary and adding some champagne yeast could help me out?

Forgot about that... 154 for 60 mins 168 for 10 mins with a 10 min rise

Hello Yooper, I have checked twice now over 36 hours with no change in gravity. Thanks

Hello all. I am having an unusual issues. I have recently brewed a rauchbeir with the following recipe: 3 gallon batch OG 1.054 FG 1.013 1.6 oz black malt 8 oz caramel malt 40 14 oz Munich 1 2.4 oz melanoidin 2.5 lbs German pils 3 lbs home smoked pils (smoke for 40 mins in a...

Looks awesome!

Im in!

I dont think this would be an issue at all. One solution to prevent getting as much hops into your fermenter is to start putting your hop addition into a muslin bag or some kind of strainer bag. If the yeast is fermenting, then I would say you dont have a problem. There are many people that will...

So I decided to give this whole wild yeast capturing thing a try. I went back into the woods and found some wild raspberries that I plucked and put into some wort and let sit for a week. I got a nice layer of some creamy looking stuff that looked very much like yeast. So I decided to stick it...

Hey guys! So I'm having an issue that both outlets have power when turned on. I borke off the metal tab on the hot side, but is there any other reason why it's still providing power to both outlets?

Ok do if I anchor it about half way up my keg with some tape and a good layer of insulation I should create a large enough heat sink to keep the fridge from swinging widely?

Hello everyone! So I just got done constructing my fermentation freezer/keezer. Basically, I have a STC1000 running the freezer to keep it at a constant temperature. The issue that I am facing is probe placement so that I can keep the freezer at a constant temperature without major cycling...

What is the purpose of mashing this long? Only time I have heard of someone trying to mash that long would be for souring a mash. I mean its even debatable if a full hour mash is necessary. In terms of holding temp, no, it will not hold it for 8 hours. I cant tell you how much it will drop...

Nope, not even in the detected device list. It is just like in the links posted above. I havent had a chance to look into it to see if its a parasite problem yet. Im very much new at this stuff so I am having some trouble navigating around.

I have not installed anything. The devices do not show up at all.

Alright, I got the legit Arduino and that solved the USB problem. I have the Arduino properly programmed with the hex code. I have hit another problem and just wanna ask a question: I cannot get my temp probes to show up in the installed devices section after refreshing the list. When I...

I will get a picture up after work. I read that I could try to install a bootloader and get it working, but then I noticed I need another board to do it. I just decided it wasn't worth the time or effort to source out another board and hope it works when I could return this one and by an...

Alright well, I cant get that driver install to work either... So, Im returning the item marked as defect and spending the extra few dollars to make sure that I have a proper Arduino, not the knock off. I have tried both installing the drivers, running a blink test, and a few more hours of...

I love stuff like this. I am currently stumbling through my BrewPi set up, and I plan to by a Tilt within the next month or so. I will defiantly try and contribute as much as I can. I have two brews planed for the end of the month, Ill be sure to add them to this.