Search results

Does anyone have a Proven-To-Work supplier on Amazon for the probes? These probes I got didnt work, and i'd like to not use the guess-and-check method to find working probes...

I tried that as well, and same results.. Im starting to wonder if the 5v / signal lines were swapped? not sure.

No. When the probe side is off but the Arduino/4.7k resistor is still on i get no devices.

Same results.

So i tested with +5v asserted, and i get parasitic mode ON and a temp reading with 2 devices detected. If i pull +5v i get Parasitic mode Off, and no devices detected.

Well, im stumped. Its 3 wires and a resistor...

Detected 2 devices Device 0 is a DS18B20 Device 1 is a DS18B20 Sensor 0 13.88 Sensor 1 14.25 Parasite power is: ON

Ran your script, and was able to find both sensors just find. Didnt touch my wiring and re-flashed from the Brew pi and it cant find anything. I am able to switch on/off my relays though manually by changing the pin inversion. Any ideas?

These. http://www.amazon.com/dp/B00Q9YBIJI/?tag=skimlinks_replacement-20

Question which may have been answered already, but im having issues finding the OneWire interface with my Arduino implementation. I have BrewPi running, but cant read temperatures. Anyone know if the original post here is still accurate for Arduino implementation? Is the OneWire Lib already...

Actually, im not. Just moved out there with my Wife about a month ago. We love it so far.

Built this guy last week. Love having a dedicated stand now. Still need to plum it with my Chugger but otherwise it works very well with my 3 vessel setup.

Threw this guy together in about an Hour with some insparation from other stands on here. It sits about 28" high which is perfect for me. Brewed 10 gallons on it this weekend and all I can say is WOW! What a difference it makes having a dedicated stand for everything!

Thanks Jay! Yes, I've had my Keezer for quite a while now and its almost shameful of me to say it but it has been beer-less for the better part of 2 years. https://www.homebrewtalk.com/showthread.php?t=494420 That was my build thread. Figured now is a good time to fill her up again...

Hello Everyone! I used to post up on here a bit about 3-4 years ago, but also used to religiously brew at least once a week. since then I had stopped brewing due to a move and not being able to use my Electric setup at that place. I've since moved again, and can finally brew again and i...

Shameless bump because i'm proud of what I accomplished :D

I used heavy duty construction adhesive and a few sheet metal screws from the top of the lid. Since it's not load bearing, it will work fine. I'm using the old hinges for the lid though, which may need to be replaced at some point. For now, if i'm gentle they work fine, and I added a...

Well guys, i've been brewing for some time now, and figured i'd take a break to do a major upgrade to my Keezer. For the longest time i've just used a collar for my keezer, and it worked fine.. but its time for an UPGRADE! this project has been a month in the making, but it is finally...

Sorry for the late response. I now have 2 of these as fermenters. they work great, but dont be alarmed if your airlock does not bubble away. The seal is not perfect, and will let some CO2 escape during fermentation. I have not had an infection yet. The top is sealed enough to not allow...

Should just be a T fitting, one side goes to outlet of disposal, other end goes to valve and spigot. Top of T valve goes up to recirculate the Margarita during blending. Force from blender will push Margarita up through the top of the T when the valve is closed.