Recent content by stoutman

CornyKegs 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. fridge_taps

    fridge_taps

    • stoutman
    • Media item
    • Comments: 0
    • Album: stoutman's Photos
  2. fridge_inside

    fridge_inside

    • stoutman
    • Media item
    • Comments: 0
    • Album: stoutman's Photos
  3. capper

    capper

    • stoutman
    • Media item
    • Comments: 0
    • Album: stoutman's Photos
  4. Fridge_outside

    Fridge_outside

    • stoutman
    • Media item
    • Comments: 0
    • Album: stoutman's Photos
  5. S

    First Year Cones?

    This is the S@#t Watching my first years bud. I'm in P.E.I so I'm a little behind you guys weather wise but I'm 10' as of today. Just found a spot in Halifax to get some Grains an Just finished DIY Keggerator and is running nicely. Drinking a freshly poured pint of Jillians Fancy(My own...
  6. S

    First Year Cones?

    Hey guys I have buds starting at the base of each leaf on my first year first time NUGGETs. She's up over eight feet and looking healthy. ight i expect a Cone or Two or am I just dreaming?
  7. S

    Any AG or P homebrewers here from P.E.I?

    Looking for anyone who might be from P.E.I on here that would be able to tell me where to get some grains.
  8. S

    Stirr plate project.

    Next i added a few strips of pine to adjust the height to about 3/16" above the magnets.http:https://cdn.homebrewtalk.com/gallery/data/1/liid-spacers.jpg Then i set the cover in position clamped it and put the hardware back on. the pine strips left a nice opening at the ends for air in and i...
  9. S

    Stirr plate project.

    Next i added a few strips of pine to adjust the height to about 3/16" above the magnets.http:https://cdn.homebrewtalk.com/gallery/data/1/liid-spacers.jpg Then i set the cover in position clamped it and put the hardware back on. the pine strips left a nice opening at the ends for air in and i...
  10. S

    Stirr plate project.

    here she is spinning 1 ltre with a 2" nail for a bar and also a mason jar. the flask and real bar are coming. Spins up a nice 3" vortex with the thin nail i can't wait to see it with the real thing.https://cdn.homebrewtalk.com/gallery/data/1/1ltr.jpg
  11. S

    Stirr plate project.

    Next i added a few strips of pine to adjust the height to about 3/16" above the magnets.https://cdn.homebrewtalk.com/gallery/data/1/thumbs/liid-spacers.jpg Then i set the cover in position clamped it and put the hardware back on. the pine strips left a nice opening at the ends for air in and i...
  12. S

    Stirr plate project.

    next i fitted the fan and glued on some cork for an insulator and then the magnets on top. Remember north and south. Then i made sure the thing would turn.diy stirr plate - HomeBrewTalk Gallery
  13. S

    Stirr plate project.

    first i marked and drilled the holes to fit the fan inside of the wooden keepsake box i had laying around.https://cdn.homebrewtalk.com/gallery/data/1/drilledholes1.jpg
  14. S

    Stirr plate project.

    ok so i'm making a stirr plate from a CPU fan, a model train power pack, and some magnets. also a bunch of other crap i have laying around. Got this from seabee john. it cost me $3 for the magnets. thats a little cheaper than the real thing. So here's everything together.http://
  15. diystirrplate

    diystirrplate

    glued magnets
    • stoutman
    • Media item
    • Comments: 0
    • Album: stoutman's Photos
See more
Back
Top