Thank you very much for the help, @doug293cz!
That's correct. I fly sparge and completely drain my MLT...
And your analysis was exactly what I was looking for...
I'll try to tweak BS to mach those numbers and calculate my predicted OG correctly without entering such a low efficiency, like 65.2%.
I've entered all values myself... based in information on SS site, actual measures and a lot of reading here...
Never tried to mash cheap grains for tweaking, but that's an option.
Regarding BH efficiency, do you think 65.2% is a good number?
I Fly Sparge. I've measured only the Pre Boil SG and it was 1059.
OG of wort into fermenter hit 1069.
Mash temp around 152-153F
Strike water:
Mash- 9.33gals
Sparge- 8.04gals
Pre boil Volume: 14gals
Post boil:approx 12.4gals
Boiled for 60min
Into fermeneter (trub left behind): 10.56gals
My equipment is set like this: https://ibb.co/dSR7KF
I took lots of readings among batches but since I changed my kettles something went off.
My BH efficiency was set at 72%. If I lower this to 65,20%, all the numbers get right.
My volumes seems to be right on the spot since I got 10.5gals on...
Hello all!! Recently, I'm struggling a little bit with predicted and actual OGs at BeerSmith after an upgrade to 10gal SS kettles... I don't know if it's the volume calculations, or the boil off, but I'm missing the predicted gravity by 5 or 6 points and I would like to have some advice here...
Prezados,
para instalar os engates rápidos nas conexão da válvula esfera tripartida de 1/2" instalada na panela BrewTec para mangueiras de 1/2" quais seriam os modelos recomendados?