Recent content by RockfordWhite

An alternate suggestion that i have heard is to move the thermometer outside of the kettle onto the recirculation, as there isn't too much utility of the thermometer in the bk

Yeah, i would be recirculating, but i'm worried that the mash would be way too thick and really hurt my efficiency

I'm looking to order a Utah Bio diesel basket but am worried that there might be too much space under the basket, making the mash quite thick above it. I have a spike 15g electric kettle, which i use for 5 gallon BIAB. My thermometer and whirlpool port are a bit high, and would require the...

Can prolly just email spike with your kettle dimensions and ask them, they’re fairly responsive

Just out of curiosity what’s the logic for splitting the pump output? Just to make sure you don’t dry fire? Do you run pump on full blast with this setup?

I just got a new Brew Bag from brewinabag.com to replace an older and I’ve noticed the new one is very stiff, to the point it’s hard to work with. I don’t recall my older one ever being this rigid, so I’m wondering if they are doing something different, or if there is something I can do to make...

I was wondering if anyone has tried converting the brew commander to use a 4 wire 30 amp input. If I understand correct, if done properly you wouldn’t need the 120v plug anymore to power the pump? I have a 14-30 outlet, I currently use an adapter, and I was thinking of rewiring it to be...

How fast does silica gel work? I would think it isn't instantaneous and might not be able to keep up with the boil off... If you don't want to drill into your pot, get an extra lid and attach steam condenser there

Conntek PL1430L630 Generator Adapter 30-Amp 125/250-volt L14-30 4-Prong Locking Plug to 30-Amp 250-volt L6-30R Female https://www.amazon.com/dp/B00DVE93PU/ref=cm_sw_r_cp_api_i_M-g3Db0BY3NTC Add this to that and you’re good to go.

Build or buy a steam condenser Boil kettle condenser - no overhead ventilation needed https://www.homebrewtalk.com/forum/index.php?threads/Boil-kettle-condenser---no-overhead-ventilation-needed.636955/

I would email them and say you already own a controller but want to use their kettle And see what they say

I saw somewhere that somebody rewired a regular temp probe to work with the SS brewtech controller so it’s probably doable the other way around. I can’t remember where I saw it but I recall they had to essentially guess and check

Any PID controller will regulate the voltage rather than cycling the power off, so if you compare the PID they use to the ones that have the EZBOIL there are much more features on that. Even the brew commander has more personalizations etc. The PID used in the SS system, from what i've seen is...

At HBC they indicated mid to late fall if I recall correctly. Based on some of their more recent product reveals, I’m going to bet their SVBS is going to be significantly more expensive than the competitors. Additionally, their controllers are very mediocre compared to others. FWIW

Bobby, you can actually run the entire controller off 120v, which I found out due to my miswired outlet. If you would just make a jumper between the 6-30 and a standard 5-15, it will power on, and even heat up. Should make it easier for demos!