Recent content by Red_Dog

Gascolator

In for me

It stays in the tray below the drum just clean it each roast

I have plenty of kegs to clean, please put me in.

I have the 1600 it stays outside on a cabinet when the temperature is about 40' the unit shows an error and will not start. I almost panicked, found out it's lockout to keep from roasting to cool. Warm unit up and it works every time

I'm thankful that I get to put it to the man, no crv fee! A pH meter was a big improvement in my brewing:yes:

This has my name all over it! WA HOO

My two didn't break, they just failed to stay together after a sudden stop.:eek:

I use a SQ 14 for 7 to 8 gallons of wort no problems about boiling heat I usually have to turn it down. Be sure to turn regulator all the way down before turning gas valve on, then turn regulator up to light.

United States of America

I will give it a try

Put me in

Make sure your glass is cold, pour 1/4 glass this will be foam then pour a second glass. Don't pour thru foam in first glass it won't work, usually much less foam, drop pressure to about 4psi. This has help me. I have just gone to 30psi and let set 3-4 days

Try to set page size to 72% in beersmith This worked for me

Check your mash Ph 10 minutes after doe in 5.3-5.4 This made a big difference for me and your water to grain ratio seems a bit high I use 1.25qts to one This looks like oatmeal in the morning:mug: