odie's latest activity

Sounds like it's just a bit slow to chill...pressure always drops as it gets colder.. just read the carb-chart diagonally;

forgot the spring inside?

I use a mini keg. fill with hot water and flush the line. sometimes I just pop a new keg and call it good. every few kegs I will...

OP lacks sufficient information to give a good recommendation... What is the keg configuration? Standard dip tube or Floating? What...

I don't think the "volume" of CO2 will change. If temperature drops, so will PSI...but the associated volumes/carbonation of CO2 I...

easiest fool-proof way is to use low pressure PRV. If you are storing room/cellar temps...use the red PRVs. they are around 25-30...

I used a teaspoon (tsp) becasue it works well for most beers and gave me good results. It's not exact but works very well and is much...

The wand will leave headspace. Yes, you need a little headspace. How much IDK. The wand does not lease the "correct" amount. It...

I found the "wand" would not fill the bottle completely. After filling the bottle to the very absolute top, pulling the wand out, the...

@corncob: as a counter-example for 2023/2024 forum discussion on bottling (to study? 🤷‍♂️ to ignore? 🤷‍♀️) SNPA is bottle conditioned...

when I last bottled...I just put a teaspoon of sugar in each bottle and filled straight from the fermenter spigot. No cold crash so...

Short beer lines...I recommend flow control QD or longer lines. Probe placement....I use a water bottle. Drill a hole in the cap and...

I got one of these 25 years ago. Total dope if you bottle. Fastest bottle rinser ever. I used to soak my bottle in the tub with a...

song was definitley in my head as I wrote that...

I don't bottle any more...not for 20 years. I do use Grolsch flip tops to fill from my kegs for to go beers or to parties. I just rise...