• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Recent content by Mikeman

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    NorcalBrewing Solutions Giveaway!

    In. Thanks of the chance.
  2. M

    HomeBrewTalk 2013 Big Giveaway!

    In, thanks for the chance
  3. M

    draft tower too short

    Thanks. Yeah, I'm going to do something with the all thread. I've been looking locally for some pan head bolts long enough, but have had no luck. I'll probably just have to order some. Now I need to get the top finished... I thought I would have all sorts of free time over the holidays to...
  4. M

    draft tower too short

    Here's what I ended up doing, and I think I like it. 4" sch 40 steel pipe has an OD almost identical to the OD of the mounting flange of the tower. I cut a 4" piece of pipe, then went over it with a flap disk to smooth it out. Painted with some hammer tone that will match some of the other...
  5. M

    draft tower too short

    that's probably what I will do. The tiles I plan to use for the counter are 12"x12", but I think I saw some on the same design that were 4"x4". A ~4" riser should be plenty. I'll go take a look and figure something out.
  6. M

    draft tower too short

    I guess I could have bolted the tower to the plywood, but I was thinking air circulation would have been better if it was mounted to the freezer lid. Even so, I'd like to get several inches more height if I can. I am considering a spacer, and may make a trip to the hardware store to see if I...
  7. M

    draft tower too short

    Good morning all; So I've been working on my version of a knotty pine keezer. I opted for a 3 tap tower just because I like the look, and didn't want to push my carpentry skills to the point of building a coffin. Anyhow, I got it all mocked up and operational for a party this weekend...
  8. M

    BrewHardware Giveaway!

    In please
  9. M

    Cool Brewing Giveaway!

    I'm in on this. Thanks for the chance
  10. M

    Estimating OG

    It looks like you may have had this conversation a time or 2 before. I was all prepared to pull out Palmers when I got home. Thanks for laying that out for me. I see it now. And yeah, there was nowhere near 16oz of juice in the oranges I added.
  11. M

    Estimating OG

    Nottingham is beer yeast, and its alcohol tolerance is not very well advertised. I can't wrap my head around why you would add the SGs rather than multiply, but on this scale I guess it doesn't really matter. Provided I ignore the 1 to the left of the decimal 1.090*1.040= 1.133 1.090+0.040=...
  12. M

    Estimating OG

    So on Feb 18, I mixed up a cyser using 4.5 gal hippie market unfiltered, pasteurized apple juice 13# local raw honey a couple oranges a few handfuls of raisins I had a starter of some washed sweet mead yeast going, but it never took off. Because of that, I got one going with some...
  13. M

    HomeBrewTalk 2012 Big Giveaway

    I'm so in on this. Thanks for the chance!
  14. M

    Kenmore Upright Freezer Opinions

    I've got one I setup as a fermentation chamber. I had luck bending the shelves up and out of the way, but I would only attempt it if everything was already warm. I keep the selves held up with super trick zip ties, and reinforced the bottom shelf with a 2 ton jack stand I left the top...
Back
Top