Recent content by LoganBrew

@doug293cz you were right we fiddled with it for a bit and got it all hooked up right. Now the elements are heating up!! This is just a temporary setup in the garage to make sure everything is working. we will be moving into a commercial location this summer and I'm sure we will have to get...

The bottom circuit breaker is the one that we have it hooked to, maybe we didn't do it right?

This is our wire set up, we aren't plugging the pid into an outlet they are I just wired directly in

i havent switched my 40amp breaker with a 50 yet, could there be some sort of safety in the system that if there's not enough power that the elements just wont turn on?

the white two wire zip cord goes to the solenoid for the water pump

aright I just tested coil relays and got 24 v on the picture you sent me @doug293cz

sorry guys, i really appreciate all your help ive just been busy. The elements plug into the L6-30 plug and i just got a multi meter to start testing some of these things the right way

Thanks for all the help guys I'll start giving some of these a try and see what I can find out!

I don't really know a lot about electrical stuff but we have the two elements and they are 240v 5500w and have it hooked up to a 40 amp breaker. In my head I would think that the elements would be heating up a little bit or blow the breaker if it was trying to pull to much power. But not since...

Hope these help

Thanks guys I'll post picks tonight. The relay is flashing when the element switch is on. I'm having a hard time finding any schematics for this system because the company closed.

Just wondering if anyone has any ideas on what my problem could be. Recently I bought a used 1bbl Colorado brewing system (didn't do my research before to find out they are out of business). Hooked everything up and it doesn't heat the elements. I have tested the power all the way down to where...