Recent content by gsutton

Yes, please!

Problem solved!! Thanks everyone!! It was the lights for the element switch. Apparently it cannot be lighted. I can live with that

Excellent! Thanks. I will remove the jumper and let you guys know.

Crap. I know it’s vague. I am at a loss because I wired it up so long ago. I think it’s possible that both sides of the switch may be wired together by a short jumper wire I have going from the bottom of one side to the top of the other that I assume powers the light in the switch because it...

After wiring up a new panel with a selector switch to fire one of two elements at a time I took a few year hiatus from brewing. Today I am trying to figure out what I must have done wrong. I have a single PID and SSR and two contactors and 2 elements. The switch that selects which element is on...

Yes, please!

weirdboy, Sorry for the late response, I was away from the computer until now. Thank you very much! This is exactly what I was hoping for!

Wow, I should have paid more attention in school! Would there be a way for me to make an excel form to just plug in the given and expected temperatures?

I need some help with a formula that I know is possible, because POL sent me a spreadsheet when I built his first system. I usually fill my E-HLT to the full 15 gallons and heat my strike water to a given temperature. After dough in I need to add more water to the E-HLT for the sparge and to...

I will check that out. I did switch the probes and now it will not turn on at all. Thank you for all of your help! I hope to get this working so I can brew again. It has been about 90F in my garage all summer.

I just switched the probes from one side to the other and will change c0=3.0. Because I switched the probes do you still recommend those previous settings, or would they be different now?

Output 1 is the Fridge and is set to 65F and Output 2 is the Freezer and is set to 45F.

Probe 1 is in the fridge and 2 in the freezer. I have only changed the max and min values to try to keep the freezer from running constantly. 40 to 50 for the freezer and 60 to 70 for the fridge. other than that they are all factory settings.

I have built a dual fermentation chamber out of a side by side fridge based on a few of the ones here. I have a dual stage Love controlling the freezer side and a fan to move air to the fridge side. The fan/fridge is working perfectly around 65F for my testing. However the freezer side which...