DuncB's latest activity

Thanks for the extra information.

I'm sorry I can't work out how this three way valve helps with the purging and transfer. Can you explain the plan please. I understand...

I replaced a tap just like that in my Guten 70 with a ball lock with cam lock fitting. On the inside I fitted a tube to use for...

I believe pilsner urquell is served from oak conditioned barrels at the end of their brewery tour. Not on general release though.

Can you temporarily put a shim under where the foot engages to make it tight?

2.5 volumes at 20°C corresponds to a pressure of 29 psi (gauge.) Make sure your fermenter is rated for more than this pressure before...

Whatever way you carbonate it don't over carbonate it and then put it on nitro. Nitrogen about 100x less soluble than CO2 in beer.

Free ferment CO2 to purge kegs or expensive, unknown data using beer gas. I'm ready to learn from your experiment and standing by.

That looks like it's from an IV giving set, not sure it's pressure safe or durable. Some plastics fail when exposed to starsan. Lumen is...

They certainly have an atypical neck / opening. Most Belgian beer is in normal bottles or champagne bottle style for high carbonation...

Will a champagne sized crown cap fit???

One of the most over the top features ever! So glad I was able to take advantage of the API and your work. Was on vacation last week...

Not aware of any duotight 3 way valves. Gas to gas line. With liquid to starsan capture bucket. Then swap line in for liquid to liquid...

My RaspberryPints classic taplist, before and after loading four fresh kegs. Look how close those kicks were! I have to give credit...

Think of liquor to grist ratio, as Doug says runny. Work out volume of this and hence pot size and volume. Then get a bag to fit this...