Quick little mock up before last coat of poly. Then going to mount and mark 3 holes for taps only gonna drill one since I only have 1 tap. Might take a while for the other 2 taps. But I'll have a precise mark to drill the hole. Soon gonna have it all painted and all taps in
So the tap panel is looking good with only two coats. I'm going to sand and see how it looks maybe another coat then it's onto the poly.
The fridge face only needs 1 more coat then just need to touch up the little nooks and crannies of the front then comes the decision of what to do with the...
https://youtu.be/hnRftEjmYDE
walk through. Got the paint. the tap and metal putty on the way. Gonna get everything set up and mark 2 extra holes but not drill them til I have the parts but I'm gonna finish the board. Please subscribe to my channel I know I'm just starting but new things gs to...
Got my fan in the mail. This thing was packaged nicely and feels very well put together. I made my lines that I needed to cut. I utilized the same spot that the previous fan was and just enlarged it. Well that turned out to be a pain. The plastic vent was secured in that spot well. Took a lot of...
Added the carboy shelf and routed the CO2. Wondering how I can mount my manifold. Scared to add it to the back wall but that's the only play I can since the mount I ng holes are angled and if I mount it to a side wall the kegs won't be able to get past the manifold and I really want to get...
I put both doors back on and made sure my "patch" is flat so when I get my nice stained piece it is as flush as possible legal
I wired up my old wine fridge kegerator (which would ice over the coils to fast since it's not ment to cool that low) stc1000. I built a box for it that is temporarily...
So I found this awesome side by side fridge for free on craigslist. It did stink but after a bleach bath it wasn't so much rotten fish as it was a chemical assault on my nose but I know it's clean now. After gutting the shelves from the fridge and freezer I test fitted a keg in the freezer. If I...
One last little question my sensors are too big to fit in my thermowell I was thinking of cutting the shrink wrap off the stainless steel and the wiring and adding something to the inside of the stainless piece because I get condensation in my thermowell and has shorted previous sensors. Any...
Thank you all for the help it turns out it was 3 out of my 4 sensors were bad and when the new 3 meter ones came I hooked two up and boom working like a boss thank you everyone for the info and help!
Fuzzewuzze thank you for giving me the info about the wiring I will promptly go home and fix that and I just ordered those exact sensors so I'm hoping those work. I'm really hoping those fix the issue. Did they come with Chinese writing about the wiring? Also all I should need to do is just...