• Please visit and share your knowledge at our sister communities:
    Cheesemaking Forum Cast Iron Forum Canning Forum Ceramic Grills
    Espresso Forum Hot Pepper Forums Pizza Oven Forums
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Recent content by Cyprus

Brewer's Friend 728
Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    nitrogen carbon dioxide mix

    There is normally two blends of "beer gas". One is %75 CO2 %25 Nitrogen (could also be 70/30). Then there is something like %70 Nitrogen %30 CO2 (This is sometimes referred to as Guiness gas) I have a feeling you got the standard beer gas blend and thats why you are not getting the expected...
  2. C

    Question for those of you who have the Brewer's Equip RIMS Tube

    Did you ever get an answer from brewers equipment? I am thinking about buying one of these RIMS tube. How are they? Have any pics?
  3. C

    Single Tier vs. Two Tier Build

    I found this design on another forum and think its really interesting. I was thinking about building it out of 1.5 X 1.5 steel instead of the angle iron. What do you guys think? swatman, sorry if I hijacked your thread.
  4. C

    Single Tier vs. Two Tier Build

    I plan on direct firing my MLT (keggle) and recirculating at the same time. I like the idea of using a grant thats why I was planning on having the MLT and BK at the same height. The grant will probably happen later though.
  5. C

    Single Tier vs. Two Tier Build

    I am in the process of designing a new brew stand as well and have decided to go 2 tier with one pump. HLT raised up and then the MLT and BK on the same level. I would gravity feed from the HLT to the MLT then pump from the MLT to the BK during fly sparging. The MLT and BK will be high enough to...
  6. C

    Blichmann Beer Gun give away.

    505 Thanks!
  7. C

    Jaybird's Stainless False Bottoms

    Jay, Just sent you a PM. Interested in a couple FB's (for converted kegs) and pickup tubes.
  8. C

    Do you need to clean new Co2 lines?

    I wouldn't bother cleaning or sanitizing Co2 lines. Just hook them up!
  9. C

    Jaybird's Stainless False Bottoms

    Do you have any pictures of the diptube assembly? Is it made from a stainless tube and fittings? I am also going to be direct firing my mash. Do you think I should have some spacers built on the bottom?
  10. C

    Home Filtering

    Is that just a water cartridge filter? I was also wondering what micron size are you using?
  11. C

    Skinnydip help needed

    New Belgium's Skinny Dip is a summer seasonal and I believe it has been replaced by their fall seasonal which is Hoptober (This is a new brew). You might be able to find a few six pack floating around however I wouldn't be surprised if most stores have replaced it with Hoptober by now. If for...
  12. C

    Dry hopping w/ whole leaf

    I have dry hopped with out a hop bag before.. The problem I ran into was the hops plugging up my auto siphon when transferring. So I just sanitized a make shift hop bag (5 gal nylon paint strainer bag from home depot) and slipped it over my auto siphon and then proceeded to transfer with out it...
  13. C

    How much Flaked Barley 'rule of thumb'

    I use 1/2 to 3/4 lb per 5 gal batch. Seems to work well for me.
  14. C

    Midwest regulator issue/co2 not making it into corney

    Are you sure you have the ball/pin lock connector all the way on? If so are all of your valves open? they should point inline with the hose, all the way to the left or right is the off position.
  15. C

    Colorado Brews:

    For a crazy IPA I would recommend Avery's Maharaja Avery Brewing 303.440.4324 Odell has a good IPA along with a Pale Ale. IPA India Pale Ale - Classic Odell Brewing Co Beers 5 Barrel Pale Ale 5 Barrel Pale Ale - Classic Odell Brewing Co Beers Let me know what you think of them!
See more
Back
Top