xrobevansx
Active Member
- Joined
- Jan 20, 2008
- Messages
- 33
- Reaction score
- 12
I scored a milk cooler on govdeals for $80. I got a 4 head secondary regulator and taps etc and am in the process of putting it all together
Needed an inkbird because the controller seemed to be shot. Always on. So the controller works well...already tested that.
Have parts from a single keg setup I have so have a 10lb co2 tank. Just curious if I should drill a hole for that and keep the tank outside. Still debating that.
Hers a link to my Google photo album for it: https://photos.app.goo.gl/YjP7e7y4C6eL7NR26
Anyway, please feel free to chime in. And yes...the kegs fit fine.
Needed an inkbird because the controller seemed to be shot. Always on. So the controller works well...already tested that.
Have parts from a single keg setup I have so have a 10lb co2 tank. Just curious if I should drill a hole for that and keep the tank outside. Still debating that.
Hers a link to my Google photo album for it: https://photos.app.goo.gl/YjP7e7y4C6eL7NR26
Anyway, please feel free to chime in. And yes...the kegs fit fine.
