Wooden 6-Pack Carrier

[user 62649]

Well I took some of the ideas I found here and around the great WWW and came up with my own designed 6-pack holder.

I used reclaimed crate wood which is the perfect width for these holders. I cut the bottom and two side pieces, traced the side pattern on them and then cut them out as well. I used a piece of slat wood for the sides and a 3/4" dowel for the handle. I made sure that I pre-drilled the slats for the nails and I glued and nailed all pieces together. The divider I used in this one is a piece of 5mm underlayment but I would not go that route again and use 1/4" luan.

I plan on painting it Orange and Brown for the Cleveland Browns and I attached a Bulldog bottle opener to the side.

I am also making one without the handle and instead going a little nautical and using teak wood with 1" woven rope for the handle interwoven together.

Sorry I only have one pic to add but more will be updated soon.

I am also making a bunch of these for my local club painted with the colors of their favorite team.

 

[jafo28]

Nice work! A couple of years ago my wife bought me a 4 pack holder with my brewery name engraved on it from etsy. Pretty cool.

 

[Gunfighter04]

Wait, Allentown Pa and a Cleveland browns fan. I'm locking down the borders and we're starting the manhunt now, we have an infiltrator!

Seriously, I like the carrier a lot, you have any dimensions you could throw up there for those of us too lazy to figure it out our self?

 

[user 62649]

Well the carrier is 10x5.5 in and the sides are as high as you would like them to be



Sent from my iPhone using Home Brew

 

[Sudz_Makenzie]

Nice job!
On another thread, I posted a link on how to transfer images/logos to wood using an inkjet printer. You could use this for your team images as well:

[ame]https://www.youtube.com/watch?v=qSfj6eiNzew[/ame]

 

[EJay]

You inspired me to crank out a few based on your design tonight: