Will this valve work?

[weizen]

https://www.homebrewtalk.com/f16/asco-valves-model-8030a17-120vac-107989/

Will these valves work on a LP gas system? They say 15 psi. How many psi is needed to run 2 burners? Right now I use 2 burners like this http://morebeer.com/view_product/17245//Propane_Burner_-_55000_btu

I'm looking to make a single tier system eventually. I'm slowly getting my supplies.

 

[Sawdustguy]

I am not a valve expert but the thread you linked does say that they are not rated for Natural Gas or Propane. With that geing said, they may or may not function safely with Propane. As the post in the link suggested, "use at your own risk".

 

[weizen]

My concern is more with the pressure rating. I'm looking at the 8030G017 model but the pressure ratings are the same......

 

[weizen]

They will work with LP regulator for the banjo type burners

 

[davidfricks]

I just bought one for my turkey fryer. I'm building my brew sculpture one part at a time. It wasn't cheap. Here's where I bought it for $124.68

ASCO 8030G17 120/60VAC 2-WAY SOLENOID VALVE, 1/2 IN NPT, NC, 0 TO 15 PSI

I'm surprised there aren't more posts about this valve. I eventually want to build a Brutus 10 with Blichmann burners. (banjo burner copy with stainless frame)