What do you have?

[Cheesefood]

Just curious to see what everyone has brewery wise.

 

[talleymonster]

Well, I only am set upo to brew extract right now, but I am about finished on the design for my sculpture so that I can go AG.


I have:

• 7 5 gallon glass carboys
• 2 6.5 gallon glass carboys
• 3 6 gallon glass carboys
• 6 1 gallon glass carboys
• 6.5 gallon plastic bucket fermenter
• bottling bucket
• 3 15.5 gallon kegs, ready to be cut into keggles
• free fridge from CL
• approx 10 cases of bottles (grolsch, bombers, 12oz, etc.)
• Turkey fryer (brew kettle) from Lowes
• Misc spoons, hoses, cappers, siphons, etc, etc, etc.

I think that's everything.

 

[blefferd]

keggle is next on my list of items and a high powered propane cooker, and more glass carboys(after a few months of sitting dormant my buckets are scratched and cracked so they are useless now ). i have a ton of money im my kegorator/kreezer lol

 

[Jaybird]

barley crusher mill
home made sculpture (pump) simi automated and temp controlled
IC works so good I havent got a CFC yet I was going to make one till copper shot up
6 fermenting buckets
6 carboys
20 kegs (most filled right now):rockin:
4 tap keggorator ( one of the old TRUE pepsi fridges twin sliding doors)
a temp controled fermenting fridge
a temp controlled cold conditioning frezer
commercial size pnumatic counter perssure 22oz bottler and capper
2 hand held counter pressure bottle fillers
a single jocky for small parties
and a 2 tap jocky box for bigger parties
my favorate little gadgit is the hand held Co2 injector man that thing is handy
1 extra banjo burner and decoction pot
loads of lab equipment for yeast storing and handeling
digital scale (B day present from SWMBO)
and 1 fine a$$ and patient wife to put up with all this $h!t
JJ

 

[Orfy]

KISS.

• HLT Pail and Element
• MLT Cooler
• Kettle Keggle with pan scrubber hop stopper
• Burner <20,000 BTU
• Chiller IC home made
• Fermenter Carboy x 3
• Misc Several pails, carboy caps and usual stuff

6 Kegs 1 reg, 1bottle

 

[Yuri_Rage]

I'd like to say KISS, like orfy, but I'm too much of a gadget junkie. I clicked on everything above except plate chiller and sight glass.

In case you're curious, here's a fairly complete list of brew gadgets in about the order that I acquired them:

• Haier kegerator (now converted to twin ball lock with a tower fan)
• 2 20 lb CO2 tanks and regulators
• 4 gallon stock pot
• 2 5.5 gallon "Ale Pails"
• Hydrometer and sample tube (still on my first one!)
• Digital thermometer
• Small stir paddle
• Wing capper
• 9 gallon stainless brew kettle
• 6.5 gallon Better Bottle
• Stir plate with several sizes of lab stir bars
• Erlenmeyer flasks in 1L, 2L, and 3L sizes
• Bottle tree (overflowing with bottles)
• Bottle washer
• Turkey Fryer
• Corny kegs (about 9 of 'em)
• CFC chiller
• 60 qt Ice Cube mash tun w/false bottom
• Sparge arm
• March pump
• Assorted hoses, fittings, and quick disconnects
• Grain mill with 12" steel rollers (4-5 lbs of grain per min)
• 20 gallon stainless brew kettle w/hops screen
• 5 refillable 5 gallon water jugs (for getting good brew water at the store)
• Giant NG burner
• Small brew stand (not quite a sculpture...yet)
• Copper coil that works for HERMS or immersion chilling
• 21 gallon conical fermenter (3 more in the works...TBD for sales)
• Brew closet (capable of lager temps when ambient is below 80)
• Bench capper
• Steam boiler and manifold
• Drill operated paint stirrer (mash stirring)
• Keggle (3 more in the works...TBD for sales)
• Computer controller and software (still in progress, but working)
• Peltier cooled 7.5 gallon Corny fermenter (still in progress...barely working)
• Garden sprayer for sanitizing

Damn...now that I look at that list...I think I might have a problem...

...but it's a good problem to have...

 

[McKBrew]

I've got an immersion chiller. I'm trying to keep up with the Jones's the best I can. My next purchase will rubbermaid coolers, a bigger pot, and some more better bottles. But I'm probably going to have to hold off until XMAS or tax season.

 

[beerdad]

I don't have any of that stuff. It won't even let me vote with nothing selected.

 

[Pabst Blue Robot]

Why I can't fit the car in the garage right now:

• 40 gallon mash tun (converted marine cooler with copper manifold & ball valve)
• 12.5 gallon mash tun (Cube cooler w/ copper siphon manifold)
• 25 gallon boil kettle with octagonal copper manifold & ball valve
• 15 gallon boil kettle with bazooka tube
• 15 gallon Olympia keg HLT (with valve, site, & thermometer)
• 7.5 gallon turkey frier HLT (with valve, site, & broken thermometer)
• 150k BTU jet burner
• 2x 55k BTU turkey fryer burners
• 100 lb propane tank
• 40 lb propane tank
• 20 lb exchange tank
• March pump w/ silicon hoses
• 30' IC
• 25' CFC
• Thrumometer
• Williams O2 setup
• 1 15.5 gallon keg fermentor (converted Oly keg)
• 3x 6.5 gallon glass carboys
• 5x 5 gallon glass carboys
• 3x 3 gallon glass carboys
• Half a hundred 1 gal, half gal, and quart growlers
• A bunch of bucket fermentors/bottlers/BinB mash systems, etc.
• 1 Oly keg with top cut and female npt fitting welded, waiting for cleanup
• 1 old aluminum keg, 13-15 gallons, not sure what to use for
• 17 corny kegs, all ball lock
• 2x 5lb CO2 tanks & regulators
• 3 tap single door kegerator w/ 4 port manifold (sticky rear seal faucets)
• Fermentation/lagering fridge w/ AC temp controller
• Chest freezer (fits 6 kegs or 3 fermentors) w/ Johnson temp controller
• 25 CU foot chest freezer (not yet on site)

Plus all of the little stuff. Next step will probably be a mill, I scored a main drive motor from a Xerox 4635 that should be up to the task.

 

[sudbuster]

I don't have any of that stuff. It won't even let me vote with nothing selected.

LOL, That's cool............ Stay with it, your SWMBO, will be using your head for a punching bag, maybe not

 

[sudbuster]

I've just got a regular old HERMS converted to 10 gal. SIMS, and the supporting equipment.

 

[ohiobrewtus]

I'm hoping that a barley crusher and kegging will soon be added to my list.

 

[kladue]

10 gallon SRIMS system with instant water heater/steam boiler
Additional burner and mash tun shelves for decotion and sequential brewing
3/8" SS counterflow chiller
1/2" SS counterflow chiller
Valley mill with gear motor drive
Welding O2 tank and regulator, flow meter for O2 injection
7 - 6.5 gallon carboys
5 - 6.0 gallon carboys
2 - 5.0 gallon carboys
6 - 3.0 gallon carboys
4 - 1.0 gallon carboys
30 cases 12oz bottles
3 - 1/2 Barrel kegs
4 - 5 gallon corny kegs
5 Lb Co2 system
2 - fermenting refrigerators
Hand held counterflow bottle filler
Bucket of airlocks and blow off hoses for carboys
Temperature,PH, SG, and refractometer test equipment
1/2 barrel fractioning water distallation system

 

[Cheesefood]

Awesome results on the poll. Thanks!

 

[ARV9673]

um, I guess I'm too much of a newb to even vote. I didn't recognize anything on the list!! Only things I have are a couple buckets, wing capper, assorted bottles, siphon, tubes, airlocks, and couple carboys, one still in the box (got it this week, only one fermenter, still waiting on my last batch). Oh and a Hydro I've never used.

*SIGH* Someday, I'll get there....

 

[Jaybird]

um, I guess I'm too much of a newb to even vote. I didn't recognize anything on the list!! Only things I have are a couple buckets, wing capper, assorted bottles, siphon, tubes, airlocks, and couple carboys, one still in the box (got it this week, only one fermenter, still waiting on my last batch). Oh and a Hydro I've never used.

*SIGH* Someday, I'll get there....

Just keep on keepen on... with passion comes gadgits:cross:
JJ

 

[adx]

Tell me about it. I just bought a 5 gallon cooler off of Ebay today for $20 to step up to do bigger PMs. I've been doing a few in an old small cooler we had with a grain bag. I also bought ton of swing top bottles because the deal was too good to pass up. The only problem is that I don't have enough room in my apartment for all of my stuff!

Is this hobby going make me buy a house just so I have some place to store my stuff?

 

[BierMuncher]

This about sums it up...

Except for my new BC.

 

[HenryHill]

Not much that is tangible; a nice kegging system and plenty of kegs, 3 keggles, cut, but not yet welded, nice digital scales, and a very nice place to house the brew-house.

But I do have a lot of sound plans, a solid determination, a BIL who is a welder, a taste for quality beer, and .....empty pockets.

I gather that having the right plans are the hardest thing to come up with. From there, the rest just comes.

 

[EdWort]

I've got enough stuff that SWMBO is MAKING me build my brew hut.

 

[mrk305]

lots of bottles (mostly full)
3 buckets (always full)
2 big pots
and a state of the art hi-tech digital thermometer with beeping presets

(yeah, I couldn't check anything on the poll either)

 

[Jester4176]

Dual burner propane cooker
Single burner propane cooker
2x Keggle
Homemade hop stopper
Homemade sight glass
IC
CFC
5gal cooler
2x 6 gal primaries
3x 5 gal secondaries
3 gal carboy
Stirplate w/ 1L flask
Kegerator
12x 5 gal kegs
2x 20# CO2 tanks
About 500 bottles
2x Deluxe bench cappers
Digital therm & scale
Various tubing/ canes
4 1gal glass jugs for meads
3 Ale pails
2 Autosiphons
And a partridge in a pear tree

 

[Cheesefood]

Bumping to get more responses.

 

[Drunkensatyr]

10 gal SS pot
8 gal Al pot
6 cornies
20 lb CO2 w/dual regulator
DIY Gas Manifold
Filter setup
2 burners
Full bottling setup w/more bottles than I will EVER use
5 6 1/2 carboys
3 5 carboys
1 7 1/2 bucket
MASSIVE DIY CFC
Rubbermaid container for ferm temp control
Scale
MLT
DIY Hopstopper
Assortment of flasks
A Wife that LOVES to brew!
Promash

 

[Jaybird]

Bumping to get more responses.

Bump hard enough and youll get a response
JJ