Stupid question

[Guigsy]

I have a single tap Haier BeerMeister. I want to have dual taps. I will either install and extra spout myself or buy an dual tap tower or try the PVC piping that MrWill turned me onto. If I do any of these, is a dual gauge regulator necessary or is there some kind of tubing splitter that will split the C02 distribution?

 

[c.n.budz]

You can get splitters at a welding supply store.

Increase you font size, your post is really hard to read

 

[Guigsy]

You can get splitters at a welding supply store.

Increase you font size, your post is really hard to read

What is recommended?

 

[c.n.budz]

something like this http://morebeer.com/view_product/16388/102238

If you want to expand beyond 2 lines they sell add on pieces. You can probably get them cheaper where you get your co2 tank filled, that's where I got mine

 

[kush]

Guigsy: I am currently faced with the same dilemma. I have decided to go the route to drill out a hole (with a special bit) in my current single faucet tower to add another faucet. Hardware that I am about to purchase is as follows:

- faucet
- Elbow Shank Assembly
- worm clamps
- tubing
- Wye 1/4 MPT x 1/4 FPT (co2 splitter)
- along with disconnects for the cornies
- and an additional Shutoff Valve w/Check 1/4 Barb for the regulator

 

[Guigsy]

Guigsy: I am currently faced with the same dilemma. I have decided to go the route to drill out a hole (with a special bit) in my current single faucet tower to add another faucet. Hardware that I am about to purchase is as follows:

- faucet
- Elbow Shank Assembly
- worm clamps
- tubing
- Wye 1/4 MPT x 1/4 FPT (co2 splitter)
- along with disconnects for the cornies

Nice! I'll probably do the same. Where are you getting your materials?

 

[kush]

Faucet and shank at:
http://www.micromatic.com/draft-keg-beer/taps-faucets-pid-4329AS-3E.html
That is the shank that will work with factory towers i believe. Shows the specs and all.

The rest of the stuff I need im getting from www.northernbrewer.com


I decided to go this route b/c im going to do my bottling in 5g kegs now and i wanted to have a two faucet tower and frankly....they are damn expensive. So im going the cheaper way.