kcinpdx
Well-Known Member
Hi all- I'm building a 50 amp panel using the e-brew supply kit. As soon as I turn on the key to power up, the spa panel immediately trips. I changed the key switch an same thing. I took the key switch out of the circuit and nothing, so I'm left to believe that the issue is with the contactor or how it is wired. I tested the contactor and manually switched it and there is continuity, so I'm doubting that it is a faulty contactor. So looking at the contactor here, I have A2 to key switch, key switch to 2(hot), then A1 to the neutral bus. "4" is hot (red), 1 and 3 go to their respective red and black buses. As soon as the coil is activated, the spa panel trips. I'm at a loss....
