ILMSTMF
Well-Known Member
- Joined
- Jan 17, 2014
- Messages
- 524
- Reaction score
- 161
I've never performed a closed transfer. I now have a pressure-rated FV (Fermzilla All Rounder) and I plan to use CO2 supply to move beer from FV to keg.
1) Does it matter if there is a small height differential between keg and FV? I don't have a long liquid jumper hose. Because of that, I won't be able to get the FV (much) higher than the keg.
2) Assume the beer in FV is not carbonated. Will this be as simple as doing the following?
• Connect gas supply to FV and charge to 5 psi.
• Connect jumper hose liquid QD to liquid post on FV lid.
• Connect other end of jumper's QD to liquid post of keg.
• Open PRV of keg. Beer moves.
Thanks in advance!
1) Does it matter if there is a small height differential between keg and FV? I don't have a long liquid jumper hose. Because of that, I won't be able to get the FV (much) higher than the keg.
2) Assume the beer in FV is not carbonated. Will this be as simple as doing the following?
• Connect gas supply to FV and charge to 5 psi.
• Connect jumper hose liquid QD to liquid post on FV lid.
• Connect other end of jumper's QD to liquid post of keg.
• Open PRV of keg. Beer moves.
Thanks in advance!