• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Texas Propane automation parts

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

postalbunny

Well-Known Member
Joined
Jun 5, 2011
Messages
347
Reaction score
91
Location
Houston
I've converted to electric and have propane/gas valves and propane accessories to sell off the old rig. Please msg me if you're building your own stand and looking to go propane. I've still got this assembly connected and can test-fire and demonstrate it until pieces sell off. If someone wants the bulk of the items i'd be happy to throw the control panel and various misc odds/ends.

I've got 3x BG14 burners, two converted to low pressure (i've still got the high pressure nozzles). Looking to get $25 a piece here, these are used (several years) see pictures for condition as there is some discoration.

I've got the rubber hoses and plumbing to connect one as high pressure (boil kettle, manual control) and two as low pressure (controlled via honeywell spark and PID). Each hose went into a needle valve for fine adjustment then into the valve which was screwed onto black pipe supply line. I'd like to sell the valve and spark boxes together. One valve, spark/pilot assembly, and honeywell controller $100 together for each set or buy both sets (hlt and mlt) for $175.

I've got two SYL-2342 auberin PIDs that were used to fire. They're still mounted to the control panel. You can use these for any automation setup, they worked great in my setup using a 24V transformer and RTDs to fire the burners.

There is a two stage regulator that drops the pressure for the honeywell valves, $15

Also, a regulator for attaching to the tank which i don't recall the PSI range but it's capable of handling all 3x burners firing at once, $15

I've got two extra propane tanks to sell, $20 each.

I'd be happy to ship any items, but feel cost would be prohibitive (esp the burners). Feel free to reach out with city/zip for an estimate.
 

Attachments

  • 20170821_101741.jpg
    20170821_101741.jpg
    2 MB · Views: 166
  • 20170821_115327.jpg
    20170821_115327.jpg
    1.8 MB · Views: 151
  • 20180225_122752.jpg
    20180225_122752.jpg
    959.1 KB · Views: 140
  • 20180225_122801.jpg
    20180225_122801.jpg
    1.5 MB · Views: 207
  • 20180225_122806.jpg
    20180225_122806.jpg
    1.9 MB · Views: 151
  • 20180225_122810.jpg
    20180225_122810.jpg
    1.5 MB · Views: 154
  • 20180225_122815.jpg
    20180225_122815.jpg
    861.3 KB · Views: 173
  • 20180225_122819.jpg
    20180225_122819.jpg
    1.2 MB · Views: 177
  • 20180225_122838.jpg
    20180225_122838.jpg
    1.2 MB · Views: 158
  • 20180225_122911.jpg
    20180225_122911.jpg
    2.1 MB · Views: 165
Are you parting out the control pannel / PIDs? could quite tell from the listing
 
My fault, i didn't list a price on the PIDs. For each SYL-2342 i'd take $35 or $60 for both. Please note they're the 2342 model "for relay" not the 2352 model "for ssr". They can handle "10 A of current at 120VAC" on the relay which i used to toggle the 24VAC from a doorbell transformer over to the propane valves/pilot. If you need to fire an SSR you'll prob want 2352's or you want to make sure you have a DC source to switch through the relay. Until some of these sell if you're local I can show functionality (hook up an RTD, fire a burner, etc).

I've also got an "Eagle Signal B506-5001 DIGITAL LED TIMER" timer from a Kal build that i replaced with a different timer. 24-240vac, 24VDC/5a relay. I liked the auberin beer timer better, this one was wired up and tested but swapped out before actual brewing. Looking for $50.
 
Back
Top