Priming water volume

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk:

Bucks-04

Well-Known Member
Joined
Dec 19, 2009
Messages
164
Reaction score
2
Location
DC
So I did a hef and it has been 11 days ( 2 days with same reading). Im going for CO2 volume of 3. Do i still need to boil it in water and if so how much water do i need to boil. Thanks.

I did 2 3 gal batchs and beersmith recommended 3.48oz of corn sugar.
 

Yooper

Ale's What Cures You!
Staff member
Admin
Mod
Lifetime Supporter
Joined
Jun 4, 2006
Messages
74,923
Reaction score
12,809
Location
UP/Snowbird in Florida
So I did a hef and it has been 11 days ( 2 days with same reading). Im going for CO2 volume of 3. Do i still need to boil it in water and if so how much water do i need to boil. Thanks.

I did 2 3 gal batchs and beersmith recommended 3.48oz of corn sugar.
3 volumes may cause gushers/bottle bombs. I wouldn't do that. I'd go with 1 ounce of corn sugar per gallon of finished beer.

Anyway, yes, dissolve your priming sugar in some boiling water and boil for a couple of minutes before cooling and using in your bottling bucket. The amount of water doesn't matter at all, but it's easiest to use about 1 cup.
 

ChuckO

Well-Known Member
Lifetime Supporter
Joined
Oct 14, 2008
Messages
1,027
Reaction score
161
Location
Keyrock
Bring 1 to 2 cups of water to a boil, remove from heat and add the 3.48 oz of sugar. Return to the heat and boil for at least 5 minutes to sanitize. Pour it into the bottling bucket with your beer and stir well. The amount of water won't affect the gravity very much.
 

Calder

Well-Known Member
Joined
Mar 9, 2010
Messages
8,545
Reaction score
1,035
Location
Ohio
Bring 1 to 2 cups of water to a boil, remove from heat and add the 3.48 oz of sugar. Return to the heat and boil for at least 5 minutes to sanitize. Pour it into the bottling bucket with your beer and stir well. The amount of water won't affect the gravity very much.
30 seconds at 160 F is enough to kill anything we might be concerned with. Not necessary to bring it to a boil to sanitize.

But .... It is best to boil the sugar solution to boil off any entrained oxygen in the water. Tap water has a lot of oxygen in it..
 
OP
B

Bucks-04

Well-Known Member
Joined
Dec 19, 2009
Messages
164
Reaction score
2
Location
DC
3 volumes may cause gushers/bottle bombs. I wouldn't do that. I'd go with 1 ounce of corn sugar per gallon of finished beer.

Anyway, yes, dissolve your priming sugar in some boiling water and boil for a couple of minutes before cooling and using in your bottling bucket. The amount of water doesn't matter at all, but it's easiest to use about 1 cup.
I read on Ed's ( Bee Cave Hef) that a traditional German Hef is 3volumes. But I don't want popping/fizzing going on in my mouth or bottle bombs.

If i went with what you were say 1 ounce per gal i would then do 3oz. Which i think i will do. Thanks

Bring 1 to 2 cups of water to a boil, remove from heat and add the 3.48 oz of sugar. Return to the heat and boil for at least 5 minutes to sanitize. Pour it into the bottling bucket with your beer and stir well. The amount of water won't affect the gravity very much.
30 seconds at 160 F is enough to kill anything we might be concerned with. Not necessary to bring it to a boil to sanitize.

But .... It is best to boil the sugar solution to boil off any entrained oxygen in the water. Tap water has a lot of oxygen in it..
Very much appreciated!

About to boil now
 

shanecb

Well-Known Member
Joined
Mar 14, 2010
Messages
1,410
Reaction score
78
Location
Pittsburgh, PA
I do my hefes at 3-3.5vol every time and have never had any sort of bottle problem, so I wouldn't worry about it.
 

unionrdr

Homebrewer, author & air gun collector
Lifetime Supporter
Joined
Feb 19, 2011
Messages
39,152
Reaction score
3,797
Location
Sheffield
I like to use 2C of boiled water,or at least 150-160F before mixing in priming sugar. Just stir it in till the water clears again. Put a lid on it & let it cool till needed. Or,as I've found,I put it on a pot holder on my brew stand about 2' away from my 12" turbo fan I normally use for cooling FV's. It'll cool down to pitch temp in about 10 minutes.
I think using 2C of water allows for a thinner mixture that blends in more easily in the bottling bucket.
 
Top