Quantcast

Pressure Transfer of Pressure Fermented Beer

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

mbg

Well-Known Member
Joined
Jan 17, 2017
Messages
210
Reaction score
76
Soon to try pressure fermentation using a Fermzilla All-Rounder. When it comes time to keg I would like to do a pressure transfer (new to me too). Wondering if there are any helpful guides/tips to doing this especially since the beer will carbonated start with.

Thanks,
Mike
 
OP
M

mbg

Well-Known Member
Joined
Jan 17, 2017
Messages
210
Reaction score
76
Spunding valve on receiving keg works well
Thanks - I saw some purge the keg with CO2 and just open the gas port but a valve with some back pressure makes more sense.
 

Iseneye

Well-Known Member
Joined
Sep 11, 2014
Messages
676
Reaction score
331
I would pressurise the receiving keg to the same pressure as the fermenter, or a few PSI under and then spunding valve. If you transfer from say 10 PSI down to a low PSI you will get foaming once connected.
 
Top