pat_carnig
Well-Known Member
I am wiring up a control panel with the wiring diagram below and have a question about the wiring for the RTD sensor on the PID. In the diagram it has red wires to pins 3 and 4, a white wire to pin 5 and another white wire jumping from pin 5 back to pin 3 but in the manual for the PID on the auber instruments website it does not show this, just red wires to pin 3 and 4 and a white wire to pin 5. Wondering which way would be correct.
Sent from my iPhone using Home Brew
Sent from my iPhone using Home Brew