Virginia Pico Brewing 3.5 BBL System

[PEC-Thory]

email: [email protected]
located in Manassas, VA
Pictures:
https://drive.google.com/folderview?id=0B4J8aW8KIpPnXzVXQXZfRjROM00&usp=shar
ing

Pico Double Wall Stainless Brewing System

Brew Kettle and Mash Tun: These 2 pieces are on a single stand, the stand is
missing the metal grate. These two have some exterior damage so please
review the pics closely. The one pipe coming out of the brew kettle is bent
up and dented inwards with a lot of scratches. Inside there is no visible
damage so I suspect this could be fixed, you will just need someone to
cutoff and weld a new pipe. The Mash Tun has a dent on one side but it is
cosmetic and should not affect the function.

Fermenters: Fermenter 1 is in good condition with no dents or major
scratches. Looks like the one pressure gauge is bad. On Fermentor 2, the
outside line needs to be replaced and there is a dent where it attached on
the top left side. Does not affect the inside of the tank.

Bright Tank: The bright tank is in good condition with no major dents or
scratches.

Also included are 2 new butterfly valves and 2 new brew thermometers (not
pictured).

 

[stainlessbrewer]

Per rules you have to post price

 

[DonH]

emailed for pricing

 

[Drumminguy81]

In for price.

 

[A4C]

Emailed

 

[madscientist451]

Its on Ebay for $9,999

http://www.ebay.com/itm/Pico-Brewin...480924?hash=item1c6371b65c:g:YRUAAOSwwpdW6ras

 

[Doctor_M]

email: [email protected]
located in Manassas, VA
Pictures:
https://drive.google.com/folderview?id=0B4J8aW8KIpPnXzVXQXZfRjROM00&usp=shar
ing

Pico Double Wall Stainless Brewing System

Brew Kettle and Mash Tun: These 2 pieces are on a single stand, the stand is
missing the metal grate. These two have some exterior damage so please
review the pics closely. The one pipe coming out of the brew kettle is bent
up and dented inwards with a lot of scratches. Inside there is no visible
damage so I suspect this could be fixed, you will just need someone to
cutoff and weld a new pipe. The Mash Tun has a dent on one side but it is
cosmetic and should not affect the function.

Fermenters: Fermenter 1 is in good condition with no dents or major
scratches. Looks like the one pressure gauge is bad. On Fermentor 2, the
outside line needs to be replaced and there is a dent where it attached on
the top left side. Does not affect the inside of the tank.

Bright Tank: The bright tank is in good condition with no major dents or
scratches.

Also included are 2 new butterfly valves and 2 new brew thermometers (not
pictured).

Would you sell the Brite tank separately? I'm local and very interested.

 

[stainlessbrewer]

This is a posting by a vendor and without pricing. Both violations of classified rules.