Quantcast

Virginia Pico Brewing 3.5 BBL System

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

PEC-Thory

New Member
Joined
Mar 16, 2016
Messages
1
Reaction score
0
email: [email protected]
located in Manassas, VA
Pictures:
https://drive.google.com/folderview?id=0B4J8aW8KIpPnXzVXQXZfRjROM00&usp=shar
ing

Pico Double Wall Stainless Brewing System

Brew Kettle and Mash Tun: These 2 pieces are on a single stand, the stand is
missing the metal grate. These two have some exterior damage so please
review the pics closely. The one pipe coming out of the brew kettle is bent
up and dented inwards with a lot of scratches. Inside there is no visible
damage so I suspect this could be fixed, you will just need someone to
cutoff and weld a new pipe. The Mash Tun has a dent on one side but it is
cosmetic and should not affect the function.

Fermenters: Fermenter 1 is in good condition with no dents or major
scratches. Looks like the one pressure gauge is bad. On Fermentor 2, the
outside line needs to be replaced and there is a dent where it attached on
the top left side. Does not affect the inside of the tank.

Bright Tank: The bright tank is in good condition with no major dents or
scratches.

Also included are 2 new butterfly valves and 2 new brew thermometers (not
pictured).
 

Doctor_M

Well-Known Member
Lifetime Supporter
Joined
May 2, 2012
Messages
869
Reaction score
118
Location
Falls Church
email: [email protected]
located in Manassas, VA
Pictures:
https://drive.google.com/folderview?id=0B4J8aW8KIpPnXzVXQXZfRjROM00&usp=shar
ing

Pico Double Wall Stainless Brewing System

Brew Kettle and Mash Tun: These 2 pieces are on a single stand, the stand is
missing the metal grate. These two have some exterior damage so please
review the pics closely. The one pipe coming out of the brew kettle is bent
up and dented inwards with a lot of scratches. Inside there is no visible
damage so I suspect this could be fixed, you will just need someone to
cutoff and weld a new pipe. The Mash Tun has a dent on one side but it is
cosmetic and should not affect the function.

Fermenters: Fermenter 1 is in good condition with no dents or major
scratches. Looks like the one pressure gauge is bad. On Fermentor 2, the
outside line needs to be replaced and there is a dent where it attached on
the top left side. Does not affect the inside of the tank.

Bright Tank: The bright tank is in good condition with no major dents or
scratches.

Also included are 2 new butterfly valves and 2 new brew thermometers (not
pictured).
Would you sell the Brite tank separately? I'm local and very interested.
 
Top