• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Pending Blichmann BrewEasy

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jmswarts

Active Member
Joined
Nov 28, 2014
Messages
41
Reaction score
7
10 Gallon electric Blichmann Brew easy. Both the 15 and 20 gallon have new
Blichmann heating coils, this is a 240v system that is amazing. The auto
sparge makes brewing an easy process. I have added two additional temp
probes and had the stainless steel port soldered in with food grade silver
solder. I have an additional 10 gallon boil coil and an extra power cord. $700
20200722_134542.jpg

20200722_134537.jpg
20200722_131915.jpg
20200722_131906.jpg
The electric control panel is set up for 50 amp, however, the power cord is
a 30 amp Xerox cord. It is set up as a three vessel brewing but only used
the Brew Easy on it. The control panel has Auber EZboil PID controller one
DSPR120 and one DSPR300, which are simple and awesome to use. I have two
boxes of extra part that could be used to almost set up another system.
Included are two temp probe wires. $300
20200722_091611.jpg

20200722_091438.jpg
20200722_091629.jpg
20200722_091715.jpg
20200722_091653.jpg
Two XChugger pumps with stainless steel heads. They are 115v in new
condition. $100

If possible I would like to sell all together but will piece it out with the
right offer. I am located in Davenport Iowa and am willing to drive up to
200 miles to meet.
20200722_091228.jpg
20200722_134542.jpg
20200722_134537.jpg
20200722_131915.jpg
20200722_131906.jpg
20200722_091611.jpg
20200722_091438.jpg
20200722_091629.jpg
20200722_091715.jpg
20200722_091653.jpg
20200722_091228.jpg
 
I am in Iowa. At this time I am not really interested in separating the brew easy up.
 
No sorry I didn't mean for you to split up just asking if they were G2's that could be used separately. Totally interested in the whole setup although unfortunately would involve shipping
 
Back
Top