You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
Rhode Island Parting out complete 1/2BBL Home Brewery and Draught System
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
- Complete 1/2 BBL brewhouse with water filter, inline pump, tippy-dump insulated mash tun, and custom-welded frame
- Complete 4+ tap draught system with chest freezer, corny kegs, CO2, and perlick faucets
- Full fermentation setup including yeast starting plate, lagering fridge, heat pad, and custom hot/cold temperature controller
- Every accessory imaginable
Make me an offer on anything!!
Pictures at https://drive.google.com/open?id=1zyHO_YJgrIwgKgqzx53EYqcOKmGEEkCM
1/2 BBL brewhouse - $1,000
- Inline March pump with temp guage
- HLT keggle with thermometer and sight glass
- Gravity fed liquor and wort transfer
- Tip / dump insulated mash tun
- Copper arm for wort recirculation and carboy filling
- Cam lock tubing connections
- Copper immersion chiller
- False bottoms
APPLIANCES
- 13.2 cuft chest freezer. Holds 4 corny kegs plus co2, or 2 carboys plus space. On custom wheeled platform. 2 baskets - 1 available, $150 each
- Lagering minifridge, fits 1 carboy - 1 available, $50 each
- Temp controller (analog) - Johnson controls - 1 available, $35 each
FERMENTATION
- Custom built hot and cold temp controller - 1 available, $40 each
- better bottle - 6.5 gal - 2 available, $15 each
- glass carboy - 6.5 gal - 3 available, $20 each
- ph test strips - 1 available, $4 each
- brewer's refractometer - 1 available, $25 each
- bubble airlocks - 4 available, $0.5 each
- goose neck airlock - 1 available, $0.5 each
- carboy caps w/ blowoff port - 4 available, $2 each
- carboy stoppers for airlock - 2 available, $1 each
- brew hauler carboy handles - 1 available, $8 each
- tube for hydrometer readings - 1 available, $3 each
- home made stir plate with 2 magnets - 1 available, $20 each
- 2L yeast flask - 1 available, $15 each
- 1L yeast flask - 1 available, $8 each
- wyeast chart - 1 available, $0.5 each
- metal carboy handle - 1 available, $3 each
- large racking cane / siphon - 1 available, $8 each
- brewer's edge fermentation space heater - 1 available, $15 each
- wine thief - 1 available, $4 each
- true brew tall 6gal buckets w/ spout and lid - 2 available, $10 each
- true brew short 6gal bucket w/ lid - 1 available, $10 each
CLEANING
- pbw - large - 1 available, $4 each
- starsan - large - 1 available, $10 each
- starsan - small - 1 available, $7 each
- iodine - large - 1 available, $1 each
- carboy dryer - 2 available, $4 each
- Mark's keg and carboy washer - 1 available, $60 each
- carboy ramps - 2 available, $2 each
- bottle brush - 1 available, $4 each
- carboy brush - 1 available, $3 each
BREWING
- Barley Crusher malt mill - 1 available, $75 each
- small plastic mash paddle - 1 available, $2 each
- large wooden mash paddle - 1 available, $5 each
- wort thermometer - 1 available, $2 each
- large funnel w/ screen - 1 available, $5 each
- wort aerator - 1 available, $5 each
- large plastic mash paddle - 1 available, $4 each
- 10" water filter w/ hoses, fittings, and extra tank - 1 available, $20 each
- brewer's best australian ipa kit - 1 available, $15 each
- hose wye with tubes and valves at end for HLT and immersion chiller - 1 available, $10 each
- propane tank guage - 1 available, $8 each
BOTTLING
- bottle filler with spring stopper - 1 available, $2 each
- home made draught bottle filler - 1 available, $0.5 each
- 02 absorbing caps, bag of 100 - 2 available, $3 each
- bottle drying tree for 96 bottles, with jet rinser/sanitizer - 1 available, $30 each
- bottle capper - 1 available, $10 each
- bottle rinser - screws to faucet - 1 available, $8 each
- quick carbonation cap - 1 available, $4 each
DRAUGHT
- corny kegs - 3 available, $40 each
- perlick faucets - 2 available, $25 each
- american sanke taps - 2 available, $15 each
- picnic tap - 1 available, $2 each
- picnic tap assembly with tube - 1 available, $8 each
- ball lock beer connectors, screw end - 4 available, $2 each
- ball lock gas connectors, screw end - 4 available, $2 each
- ball lock gas connectors, barb end - 1 available, $2 each
- co2 regulator w/ rubber guage covers - 1 available, $40 each
- 1/4 and 5/16 homebrew barbs and nuts - 8 available, $1 each
- faucet wrench - 1 available, $3 each
- ball lock connector washers, mylon flared - 10 available, $0.5 each
- brass shank assemblies, 4", stainless collars - 4 available, $20 each
- barbs for sanke taps - 7 available, $1 each
- screw drive tubing clamps - 20 available, $0.25 each
- sanke to ball 1/4" screw ball lock connectors, flare nipple - 2 available, $3 each
- 1/4" flare to barb adapter - 1 available, $3 each
- keg lube - 1 available, $2 each
- wing nut sanke/shank connectors - tail pieces - 5 available, $4 each
- ball lock keg ratcheting wrench - 1 available, $6 each
- keg pressure guage assembly - 1 available, $12 each
- faucet caps - 2 available, $0.25 each
- gas shutoff valve w/ barb - 1 available, $4 each
- tap handles w/ label holders - 4 available, $5 each
- draught tubing cleaning kid with pump - "jiffy cleaner kit" with adapters and solution - 1 available, $15 each
- baseball card holders, for tap handle labels, box - 1 available, $0.5 each
- ball lock keg connectors, spare - 6 available, $6 each
- ball lock keg lid gaskets - 3 available, $1 each
- wooden tap handle face - 1 available, $0.5 each
- Complete 1/2 BBL brewhouse with water filter, inline pump, tippy-dump insulated mash tun, and custom-welded frame
- Complete 4+ tap draught system with chest freezer, corny kegs, CO2, and perlick faucets
- Full fermentation setup including yeast starting plate, lagering fridge, heat pad, and custom hot/cold temperature controller
- Every accessory imaginable
Make me an offer on anything!!
Pictures at https://drive.google.com/open?id=1zyHO_YJgrIwgKgqzx53EYqcOKmGEEkCM
1/2 BBL brewhouse - $1,000
- Inline March pump with temp guage
- HLT keggle with thermometer and sight glass
- Gravity fed liquor and wort transfer
- Tip / dump insulated mash tun
- Copper arm for wort recirculation and carboy filling
- Cam lock tubing connections
- Copper immersion chiller
- False bottoms
APPLIANCES
- 13.2 cuft chest freezer. Holds 4 corny kegs plus co2, or 2 carboys plus space. On custom wheeled platform. 2 baskets - 1 available, $150 each
- Lagering minifridge, fits 1 carboy - 1 available, $50 each
- Temp controller (analog) - Johnson controls - 1 available, $35 each
FERMENTATION
- Custom built hot and cold temp controller - 1 available, $40 each
- better bottle - 6.5 gal - 2 available, $15 each
- glass carboy - 6.5 gal - 3 available, $20 each
- ph test strips - 1 available, $4 each
- brewer's refractometer - 1 available, $25 each
- bubble airlocks - 4 available, $0.5 each
- goose neck airlock - 1 available, $0.5 each
- carboy caps w/ blowoff port - 4 available, $2 each
- carboy stoppers for airlock - 2 available, $1 each
- brew hauler carboy handles - 1 available, $8 each
- tube for hydrometer readings - 1 available, $3 each
- home made stir plate with 2 magnets - 1 available, $20 each
- 2L yeast flask - 1 available, $15 each
- 1L yeast flask - 1 available, $8 each
- wyeast chart - 1 available, $0.5 each
- metal carboy handle - 1 available, $3 each
- large racking cane / siphon - 1 available, $8 each
- brewer's edge fermentation space heater - 1 available, $15 each
- wine thief - 1 available, $4 each
- true brew tall 6gal buckets w/ spout and lid - 2 available, $10 each
- true brew short 6gal bucket w/ lid - 1 available, $10 each
CLEANING
- pbw - large - 1 available, $4 each
- starsan - large - 1 available, $10 each
- starsan - small - 1 available, $7 each
- iodine - large - 1 available, $1 each
- carboy dryer - 2 available, $4 each
- Mark's keg and carboy washer - 1 available, $60 each
- carboy ramps - 2 available, $2 each
- bottle brush - 1 available, $4 each
- carboy brush - 1 available, $3 each
BREWING
- Barley Crusher malt mill - 1 available, $75 each
- small plastic mash paddle - 1 available, $2 each
- large wooden mash paddle - 1 available, $5 each
- wort thermometer - 1 available, $2 each
- large funnel w/ screen - 1 available, $5 each
- wort aerator - 1 available, $5 each
- large plastic mash paddle - 1 available, $4 each
- 10" water filter w/ hoses, fittings, and extra tank - 1 available, $20 each
- brewer's best australian ipa kit - 1 available, $15 each
- hose wye with tubes and valves at end for HLT and immersion chiller - 1 available, $10 each
- propane tank guage - 1 available, $8 each
BOTTLING
- bottle filler with spring stopper - 1 available, $2 each
- home made draught bottle filler - 1 available, $0.5 each
- 02 absorbing caps, bag of 100 - 2 available, $3 each
- bottle drying tree for 96 bottles, with jet rinser/sanitizer - 1 available, $30 each
- bottle capper - 1 available, $10 each
- bottle rinser - screws to faucet - 1 available, $8 each
- quick carbonation cap - 1 available, $4 each
DRAUGHT
- corny kegs - 3 available, $40 each
- perlick faucets - 2 available, $25 each
- american sanke taps - 2 available, $15 each
- picnic tap - 1 available, $2 each
- picnic tap assembly with tube - 1 available, $8 each
- ball lock beer connectors, screw end - 4 available, $2 each
- ball lock gas connectors, screw end - 4 available, $2 each
- ball lock gas connectors, barb end - 1 available, $2 each
- co2 regulator w/ rubber guage covers - 1 available, $40 each
- 1/4 and 5/16 homebrew barbs and nuts - 8 available, $1 each
- faucet wrench - 1 available, $3 each
- ball lock connector washers, mylon flared - 10 available, $0.5 each
- brass shank assemblies, 4", stainless collars - 4 available, $20 each
- barbs for sanke taps - 7 available, $1 each
- screw drive tubing clamps - 20 available, $0.25 each
- sanke to ball 1/4" screw ball lock connectors, flare nipple - 2 available, $3 each
- 1/4" flare to barb adapter - 1 available, $3 each
- keg lube - 1 available, $2 each
- wing nut sanke/shank connectors - tail pieces - 5 available, $4 each
- ball lock keg ratcheting wrench - 1 available, $6 each
- keg pressure guage assembly - 1 available, $12 each
- faucet caps - 2 available, $0.25 each
- gas shutoff valve w/ barb - 1 available, $4 each
- tap handles w/ label holders - 4 available, $5 each
- draught tubing cleaning kid with pump - "jiffy cleaner kit" with adapters and solution - 1 available, $15 each
- baseball card holders, for tap handle labels, box - 1 available, $0.5 each
- ball lock keg connectors, spare - 6 available, $6 each
- ball lock keg lid gaskets - 3 available, $1 each
- wooden tap handle face - 1 available, $0.5 each
How much for the whole set?
How much for the whole set?
Hey Josh - I'd ask $2250 for the entire lot
Definitely - I wouldn't make anyone pay for the shipping on this!!