Nothing coming out of keg

[skydog4884]

So i built a kegerator, i have been dispensing my homebrew perfectly. I bought a d style sankey coupler to put on a bud light keg (I know, i know i just dont want a bunch of random people drinking my homebrew) and i switched over the hoses. I transported the keg into the fridge, let sit for hours then tapped, let sit for an hour and tryed to dispense. Nothing comes out. I can see small co2 bubbles coming out of the top of the tap into the beer hose. Please help. I need to get this pouring. Foam pours out at like a tablespoon per minute of the tap. Thanks for your help

Skyler

 

[Professor Frink]

Are you sure you have pressure going into the keg? If there's a leak, you won't be able to dispense any either.

 

[skydog4884]

when i take the tap off and just lower the handle without attached to a keg, it pushes out tons of co2.

 

[skydog4884]

I figured it out. There were two little plastic balls in the coupler that i did not realize were there. i removed those, hooked the hose back up and it worked like a champ