Nitrogen tank with CO2 regulator / adapter

[brettg20]

Just purchased a nitro tank etc and the adapter to fit a co2 regulator. Question is will this work for a dual regulator, I have a micromatic that the 2nd gauge is showing up to 3k psi....but I will be running 2 nitro lines off of it.

 

[brettg20]

Bump...order shipping tomorrow

 

[Saboral]

Should be fine, the majority of the regulators are rated to 3000psi with nitrogen (lower pressures with co2). Shouldn't be an issue using it with two lines. The only issue I have with the co2 regulator is that it gets a bit finicky for fine adjustments above 25 psi. I think most of that issue might be that my low side gauge maxes at 30.

 

[brettg20]

I think I'll be ok, the low side gauge goes up to 60 psi so running beers at around 30 should be fine.

 

[Saboral]

Enjoy, nothing like a stout with that creamy cascading nitro head