My kegerator supplies

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk:

cnoyes

Well-Known Member
Joined
Aug 30, 2007
Messages
47
Reaction score
0
OP
C

cnoyes

Well-Known Member
Joined
Aug 30, 2007
Messages
47
Reaction score
0
I was just looking at pictures of peoples set up and I got worried that the dual regulator that comes with that kit wont fit in the Sanyo. Anybody with a Sanyo know? If it wont fit I can call Midwest quick and see if they'll give me a different regulator.
 

Professor Frink

Well-Known Member
Joined
Sep 20, 2006
Messages
3,100
Reaction score
31
Location
Beacon, NY
I don't know about the dual regulator, but you can fit 2 cornies and a single regulator in the 4912. My buddy has a 4912, when I got over to his place for the super bowl, I can check the space in there.
 

Bernie Brewer

Grouchy Old Fart
Joined
Feb 2, 2006
Messages
7,505
Reaction score
187
Location
Eldorado, WI
cnoyes said:
I was just looking at pictures of peoples set up and I got worried that the dual regulator that comes with that kit wont fit in the Sanyo. Anybody with a Sanyo know? If it wont fit I can call Midwest quick and see if they'll give me a different regulator.
I don't have a Sanyo; I have a Danby, but I do have the dual regulator. I don't keep my tank in the fridge, I run the hoses in through the hump where the compressor is, and keep the tank in a cabinet next to the kegerator. I have found that the regulator works better at room temps anyway.
 
OP
C

cnoyes

Well-Known Member
Joined
Aug 30, 2007
Messages
47
Reaction score
0
Professor Frink said:
I don't know about the dual regulator, but you can fit 2 cornies and a single regulator in the 4912. My buddy has a 4912, when I got over to his place for the super bowl, I can check the space in there.
I'd really appreciate that if you don't mind.
 

Blender

Well-Known Member
Joined
Jan 6, 2006
Messages
3,106
Reaction score
10
Location
Santa Cruz, CA.
Professor Frink said:
I don't know about the dual regulator, but you can fit 2 cornies and a single regulator in the 4912. My buddy has a 4912, when I got over to his place for the super bowl, I can check the space in there.
I have the Sanyo and a dual regulator. It will fit but you will need a shelf for the regulator plus I removed the inner door skin.
 
OP
C

cnoyes

Well-Known Member
Joined
Aug 30, 2007
Messages
47
Reaction score
0
So is your regulator not connected directly to the co2 tank, as in the picture of the kit I ordered at the top of the thread?
 

Blender

Well-Known Member
Joined
Jan 6, 2006
Messages
3,106
Reaction score
10
Location
Santa Cruz, CA.
No, it's connected just as shown but sits behind the kegs on a small shelf. After removing the front door skin you have enough room for the kegs to move up closer to the door. It does to wanna tip to one side so you have to secure it a bit to make it less tipsy.
 
Top