My first AG brew stand

[ForestGroveBrewer]

Hi,

I just completed my first single tier brew stand. Now that I have used it a few times I have some questions.
1. I used (2) BG-10 burners with needle valves. I ran 1/2 black pipe to a single propane source with a 30PSI regulator to feed them. What are my options to converting to natural gas?

2. Second question is gas related as well. Between the needle valves and the burners I could only find copper tubing with compression fittings to use. I would much rather have a flexible hose of some sort but can not find anything. It would be going from 1/4 NPT to 3/8 flare. Any ideas?

I am hoping someone ran into similar issues and can point me to the right parts.

Thanks!

 

[brew_ny]

http://www.walmart.com/ip/22217713?...39523076&wl4=&wl5=pla&wl6=50568706956&veh=sem

I used this for gas to a stove and it worked good I got mine at a hardware store but this was the first link in google

I used it for bottled gas but I believe it would work NG

as to using your burner on NG if you can change the orifice I believe you should be able to convert it

all the best

S_M