California MoreBeer Tippy Dump Brewing Sculpture

[zervasj]

SOLD

MoreBeer Tippy Dump Brewing Scuwlpture

FOR SALE - $4200.00

MoreBeer Tippy Dump Brewing Sculpture with integrated rims system and 120v professionally wired control box. This pilot brew system was used for recipe development and professional brewer experimental batches in the publishing of Hops to Table Magazine – a regional craft beer magazine in the Sacramento/Chico vicinity. (https://issuu.Com/499261).

Includes 15 and 26 gallon MoreBeer heavy duty pots upgraded with welded tri-clover furrules and welded NTP ports for brewing 5-25 gallon batches.

Includes all SS professional grade hardware (Brewers’ Hardware butterfly valves and 1” pickup tubes) and March 815 pump with upgraded head.

Includes Morebeer Ultimate Sparging Arm and MoreBeer Automated Float System.

MoreBeer Tippy Dump Brew Sculpture
- Upgraded with three (3) 10,000 BTUs Jet Burners
- Upgraded Ultra High Heat Coating
- Upgraded with Heavy Duty High Pressure Propane with flow value
- Upgraded with One (1) Brewers’ Hardware Tri-Clover SS Rims Tube with Sight Glass

Custom 120V RIMS/SPARGE Control Panel
- Two (2) PID’s precisely controlling RIM Temperature, PUMP and Automated Sparge
- One (1) Auto Float Unit for Sparge Control
- Three (3) RTD Temperature Control Plugs

MoreBeer 26 Gallon Brewing Pots (Food Grade: Extra thick. 1.2 mm thick sidewall and a 5mm thick bottom)
- HLT upgraded with Welded Tri Clover 1.5” Furrule; Welded NTP Temperature Port w/Analog Temperature Gauge; Welded NTP Port for Sight Gauge and Welded NTP Temperature Port for RTD inputs.
- Mash Tun upgraded with Welded Tri Clover 1.5” Furrule; Welded NTP Temperature Port w/Analog Temperature Gauge; Welded NTP Temperature Port for RTD inputs.
- Boil Kettle upgraded with Welded Tri Clover 1.5” Furrule; Welded NTP Temperature Port w/Analog Temperature Gauge; SS Weldless Whirlpool Arm; and Welded NTP Temperature Port for RTD inputs.

MoreBeer 15 Gallon Brewing Pots (Food Grade: Extra thick. 1.2 mm thick sidewall and a 5mm thick bottom)
- HLT upgraded with two-way NTP Port; Welded NTP Temperature Port w/Analog Temperature Gauge; Welded NTP Port for Sight Gauge.
- Mash Tun upgraded with Refletix Insulation with Neoprene Cover; Welded Tri Clover 1.5” Furrule; Welded NTP Temperature Port w/Analog Temperature Gauge and Welded NTP Temperature Port for RTD inputs.
- Boil Kettle upgraded with Welded Tri Clover 1.5” Furrule; Welded NTP Temperature Port w/Analog Temperature Gauge; SS Weldless Whirlpool Arm; and Welded NTP Temperature Port for RTD inputs.

Pump
- One (1) March 815-PL High Temperature Brewing Pump - High Flow with upgraded SS 3/4” Inlet

Hardware
- One (1) MoreBeer Ultimate Sparge with 1/2” Ball Value
- Three (3) Brewers Hardware 1.5” Tri Clover Butterfly Valve - Pull Trigger
- Six (6) Brewers Hardware 1.5” Tri Clover 1/2” Hose Barbs and Associated Clamps
- One (1) 6” 3/4” High Temperature 3/4” Silicone Hose
- 1/2” High Temperature 1/2” Silicone Hose (Various Lengths)

Propane Tanks
- Two (2) Ten Gallon Exchangeable Propane tanks

 

[1949Pu]

Still 4 sale? Where are you located?

 

[zervasj]

Still 4 sale? Where are you located?

The system is located in Sacamento, CA. It is not officially sold. I have somebody interested who is coming to see it Sunday and another who is ready with an offer if the Sunday buyer doesn't come through. So long story short, I am accepting backup offers at this point and will update early next week.

Cheers,
John

 

[1949Pu]

Did it sell?

 

[zervasj]

The item sold last night.