Morebeer Deluxe Counter Pressure Filler

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

HazyBeer

Active Member
Joined
Sep 9, 2020
Messages
43
Reaction score
18
Any advice on the use of the Morebeer Deluxe Counter Pressure Bottle Filler? I'm guessing that I leave the keg connected to CO2 at serving pressure of around 10psi. Connect CO2 side of filler at also around 10psi. Turn on the CO2 on the filler with a little flow and insert in the bottle sealing with the cork. Adjust spunding valve so the gauge reads 8psi. Switch to the beer side on the filler and fill to the top. Remove filler and let foam rise to top and cap. Do I have the pressures right? Seems like the beer will not flow unless spunding is set less than the kegs CO2 pressure?
 
Back
Top