I just bought this setup from member volshersheers a couple of months ago. Long story short, after a close friend of my wife and I encountered serious health issues since then, we've decided to focus on some healthier habits for now, and unfortunately brewing doesn't lend itself to that for me.
Pictures below are from volshersheers original post, with the only difference being that I've relocated all of this from Knoxville, TN to Springfield, MO. I do have an additional Tilt hydrometer, stainless quick connect fittings, a couple of stainless mash paddles and probably other stuff to add the list below.
Oh, the one thing not included from volsherdeers original post was the breaker panel with GFCI breaker (it was going to be a pain/eyesore if removed from his place).
Asking $5500 and not willing to seperate at the moment. FYI - It did take every bit of a 6.5" truck bed and dual axle trailer to load all of it.
Kal Control Panel 30A
3-20G Blichmann Boiler Maker Kettles (1st Gen)
Monster Mill
Anvil Scales
SS Mash Paddle
SS Racking Arm
SS Brewtech Sparge Arm
Brewing Salts
Calibration Weights
Hannah HI98128 PH Meter
Hannah HI96811 Refractometer
Tilt Hydrometer + spare battery
Raspberry Pi Zero (tilt repeater)
2 Piece Pancake Filter
2 CCWC's
SS Hop Filter
Blichmann CP Bottle Filler
Sight Glass with Carb stone & temp probe ports
Corning Stir Plate
5L Flask
Yeast Harvester
14G SS Brewtech Fermenter with leg extensions
Test Jar and Two Hydrometers
15G Keg Fermenter with ss thermowell
Beverage-Air MT38 Fridge controlled by a Johnson A419
Brand New Unopened Exhaust fan (like one in first photo)
4-Tap Beverage-Air BM23 Kegerator with RaspberryPints and 4 flow meters With Temperature Logging
5 Cornelius Kegs
3 Tap Tower
Kegging Filter System with 3 new filters
Misc Keg & Bottling Parts
4 New Drip Pan Inserts
20# 10# & 2.5# Co2 Bottles
Insigna Single Tap Kegerator
Misc Fittings & Gaskets
Sanke Valve & Spear Removal Tool
SS Sink with wet table and gooseneck sprayer
6' SS Table
Water Filter System
Picnic Tap with flow control
3-Way Manifold
Extra Regulator and Gauges
Sanke Tap with Ball lock Adapters
Pictures below are from volshersheers original post, with the only difference being that I've relocated all of this from Knoxville, TN to Springfield, MO. I do have an additional Tilt hydrometer, stainless quick connect fittings, a couple of stainless mash paddles and probably other stuff to add the list below.
Oh, the one thing not included from volsherdeers original post was the breaker panel with GFCI breaker (it was going to be a pain/eyesore if removed from his place).
Asking $5500 and not willing to seperate at the moment. FYI - It did take every bit of a 6.5" truck bed and dual axle trailer to load all of it.
Kal Control Panel 30A
3-20G Blichmann Boiler Maker Kettles (1st Gen)
Monster Mill
Anvil Scales
SS Mash Paddle
SS Racking Arm
SS Brewtech Sparge Arm
Brewing Salts
Calibration Weights
Hannah HI98128 PH Meter
Hannah HI96811 Refractometer
Tilt Hydrometer + spare battery
Raspberry Pi Zero (tilt repeater)
2 Piece Pancake Filter
2 CCWC's
SS Hop Filter
Blichmann CP Bottle Filler
Sight Glass with Carb stone & temp probe ports
Corning Stir Plate
5L Flask
Yeast Harvester
14G SS Brewtech Fermenter with leg extensions
Test Jar and Two Hydrometers
15G Keg Fermenter with ss thermowell
Beverage-Air MT38 Fridge controlled by a Johnson A419
Brand New Unopened Exhaust fan (like one in first photo)
4-Tap Beverage-Air BM23 Kegerator with RaspberryPints and 4 flow meters With Temperature Logging
5 Cornelius Kegs
3 Tap Tower
Kegging Filter System with 3 new filters
Misc Keg & Bottling Parts
4 New Drip Pan Inserts
20# 10# & 2.5# Co2 Bottles
Insigna Single Tap Kegerator
Misc Fittings & Gaskets
Sanke Valve & Spear Removal Tool
SS Sink with wet table and gooseneck sprayer
6' SS Table
Water Filter System
Picnic Tap with flow control
3-Way Manifold
Extra Regulator and Gauges
Sanke Tap with Ball lock Adapters
Last edited:
