• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Texas Lots of equipment for sale :(

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk:

gigemeh

Active Member
Joined
Feb 20, 2006
Messages
44
Reaction score
1
I won't bore you with the "why", other than I simply don't get the use out of my home brewery that I used to, and it seems to me good equipment shouldn't go to waste.

I'm in Richardson, TX, and local pickup would be preferred, but if there's interest in shipping we can discuss options. I would sell it all as a package deal for a steep discount, but I have no issue with piecing it out. I haven't sat down and researched each item to see what I'd be asking for it yet, but will do so when/if someone expresses interest in each item. Or, send an offer my way and we can go from there.

Here's what I have:

Blichmann Top Tier, $750
- 2 burners (currently arranged one on top, one on bottom, both plumbed for propane)
- 2 shelves (currently one installed as middle tier, the other uninstalled)
- Only 3 tiers can be configured at any one time
- 1 utility shelf
- 1 march pump bracket

SOLD Blichmann 14.5G Fermenator, tri-clamp, $600, in person only
- With blowoff assembly
- With casters
- With stainless thermowell
- https://www.homebrewtalk.com/photo/fermenator-64965.html

Blichmann Brewpots, $250 each, not sure about shipping these due to potential damage in transit
- 10G
- https://www.homebrewtalk.com/photo/10g-brewpot---top-64959.html
- https://www.homebrewtalk.com/photo/10g-brewpot---front-64960.html
- 15G
- https://www.homebrewtalk.com/photo/15g-brewpot---front-64973.html
- https://www.homebrewtalk.com/photo/15g-brewpot---top-64961.html

SOLD 2 March Pumps (one used maybe twice), $100 each, more used pump would include new spare pump head.
- Older
- https://www.homebrewtalk.com/photo/older-pump---front-64966.html
- https://www.homebrewtalk.com/photo/older-pump---sticker-64967.html
- https://www.homebrewtalk.com/photo/equipment-64968.html
- Brand new pump head in sealed bag
- https://www.homebrewtalk.com/photo/extra-pump-head-washers-64956.html
- Barely Used
- https://www.homebrewtalk.com/photo/newer-pump---sticker-64971.html
- https://www.homebrewtalk.com/photo/newer-pump---side-64970.html
- https://www.homebrewtalk.com/photo/newer-pump---top-64969.html
-

SOLD 2 Therminators, $150 each
- I use them in a hybrid serial wort, parallel chilling water setup cause the groundwater here is always warm
- https://www.homebrewtalk.com/photo/therminators-64972.html

2 Therminator top tier brackets, $10 each

1 5G ball lock corny, probably needs a very serious cleaning for possible beer stone, $40 each

SOLD 2.5G ball lock keg used 2-3 times, absolute perfect condition, $100
- https://www.homebrewtalk.com/photo/25g-keg---top-64957.html
- https://www.homebrewtalk.com/photo/25g-keg---front-64958.html

SOLD Danby kegerator with 3 faucet tower, $500
- and 3 perlick forward sealing faucets

SOLD Stout restrictor faucet, $50
- https://www.homebrewtalk.com/photo/stout-faucet---hand-64974.html
- https://www.homebrewtalk.com/photo/stout-faucet---sideways-64975.html
- https://www.homebrewtalk.com/photo/stout-faucet-64976.html

SOLD Coke fridge that fits the Fermenator, $250
- I don't think this could be shipped economically :)


Edit: sorry for the rule breaking of not including prices. I'm going through the items and adding prices as time allows. Consider prices negotiable.
 
OP
G

gigemeh

Active Member
Joined
Feb 20, 2006
Messages
44
Reaction score
1
Forum rules, must post a price.

Whats your price for one of the March pumps.
I just saw that in the rules, and will work to getting prices listed. I apologize for this! I knew I'd end up breaking a rule I didn't know about yet. :)

Let's call it $100 per March pump. For the one I've used more, I believe I have an unused spare pump head that I will include in that price. I will check to make sure I have that tonight. If I don't, I'll lower the price of my older pump.
 

wanger99

Supporting Member
HBT Supporter
Joined
Jan 20, 2014
Messages
738
Reaction score
30
Location
Chicago - NW Burbs
Id like to call dibs on it if you are willing to ship it. Im assuming it the poly head on the pump.

I just saw that in the rules, and will work to getting prices listed. I apologize for this! I knew I'd end up breaking a rule I didn't know about yet. :)

Let's call it $100 per March pump. For the one I've used more, I believe I have an unused spare pump head that I will include in that price. I will check to make sure I have that tonight. If I don't, I'll lower the price of my older pump.
 
OP
G

gigemeh

Active Member
Joined
Feb 20, 2006
Messages
44
Reaction score
1
Id like to call dibs on it if you are willing to ship it. Im assuming it the poly head on the pump.
Let me check tonight to see if I have the original box and materials for the pump (I think I do). Assuming I have that, I certainly have zero issue shipping it. Cost to ship would be actual postage they charge me.
 
OP
G

gigemeh

Active Member
Joined
Feb 20, 2006
Messages
44
Reaction score
1
I would be interested in a couple cornies, if they are ball lock. Shipping to 30710
All kegs are ball lock. Do you guys know how much it should cost to ship cornies these days? What should you use for sufficient packaging?
 

grrickar

Well-Known Member
Joined
Nov 13, 2014
Messages
946
Reaction score
233
Location
New Bremen
I'd be interested in the other March pump. Can you calc shipping to 45869 and tell me what kind of head it has on it?
 

Andymitty

Member
Joined
Feb 11, 2015
Messages
14
Reaction score
0
Location
San Antonio
If you split the faucets from the Kegerator I would be interested in purchasing two of them. Also interested in a 5G corny and possibly the 15G brewpot. I'm located in San Antonio and probably can't make the 8 hour round trip for local pickup but shipping might be cheaper since it's only a few hundred miles.

Please let me know.
 
OP
G

gigemeh

Active Member
Joined
Feb 20, 2006
Messages
44
Reaction score
1
I'll be honest, I wasn't ready for or expecting this kind of immediate response! I'm going to do my best to give dibs to the first posters that contacted me about a specific item. Please bear with me while I get questions answered and allow posters to decide about items. I will update the original post when items are definitely sold and no longer available.

Pictures are absolutely available for any item, and I prefer that pictures be sent before any payment is made, if for no other reason than to make sure the product is what the buyer is expecting. Speaking of payments, what do you guys usually prefer on here? Obviously no Western Union. :)
 

thekraken

Well-Known Member
Joined
Aug 18, 2014
Messages
1,957
Reaction score
449
Location
DFW
I'm the guy that was PM'ing you about the cornies for local pick up. I prefer cash and a hand shake. ;) Paypal works too.

Just posting here so I don't forget about it.
 
OP
G

gigemeh

Active Member
Joined
Feb 20, 2006
Messages
44
Reaction score
1
The Fermenator (14.5G, tri-clamp variety) is $869 new, blowoff assembly is $130 new, casters are $100 new. I'll also include the stainless thermowell that fits it great.

I need to sell them all together, and in person due to the cost, potential damage from shipping, and assurance of quality before completed sale. The casters give me problems with the brakes sometimes.

I'm going to say $600 for all of it.

The coke fridge I have it in is $250, and I have a dual stage Johnson temperature controller that I will look at later to get a model# and price.
 

Frostbrewer

Well-Known Member
Joined
Jun 24, 2013
Messages
200
Reaction score
18
Location
Tulsa
2nd in line on that stout faucet if rockymountainbrew decides not to take it please.
 

Hello

Well-Known Member
Joined
Aug 19, 2013
Messages
11,420
Reaction score
3,400
Location
Raleigh
How much for the 15g pot and can you show a pic?
 
OP
G

gigemeh

Active Member
Joined
Feb 20, 2006
Messages
44
Reaction score
1
Added links to several photos. Still working on shipping estimates for some of you that have PMed me.

Thanks for your patience, everyone!
 

eelgerg

Well-Known Member
Joined
Sep 16, 2014
Messages
306
Reaction score
17
Is it just me or are the links to all the photos messed up????
 
OP
G

gigemeh

Active Member
Joined
Feb 20, 2006
Messages
44
Reaction score
1
Hmmm...are they messed up? I logged out of my username and could still see them, but I'm admittedly very new to posting images on homebrewtalk.
 

eelgerg

Well-Known Member
Joined
Sep 16, 2014
Messages
306
Reaction score
17
When I click on a link it takes me to a different forum post 80% of the time - others say "no image"
 
OP
G

gigemeh

Active Member
Joined
Feb 20, 2006
Messages
44
Reaction score
1
When I click on a link it takes me to a different forum post 80% of the time - others say "no image"
Odd. Is anyone able to see the images without issue?

eelgerg, can you tell me if it does this for all of the links for you, or are you clicking on one in particular that just continues to do it?
 

eelgerg

Well-Known Member
Joined
Sep 16, 2014
Messages
306
Reaction score
17
Wierd....

First link (fermentation) takes me to a thread in Gen Beer Discussion called "suggestions for a new batch"

Maybe something is F'ed withy iPhone app?
 

eelgerg

Well-Known Member
Joined
Sep 16, 2014
Messages
306
Reaction score
17
Most photo links do the same. Anyways - it seems to be only me so let's just carry on with your sale unless anyone else finds the same issues.
 

Dave_K

Well-Known Member
Joined
Oct 10, 2012
Messages
101
Reaction score
34
Location
Dallas
Interested in a few 5 gal cornies for local pick up. PM sent.
 
OP
G

gigemeh

Active Member
Joined
Feb 20, 2006
Messages
44
Reaction score
1
Btw, I downloaded the iPhone app and experience the photo woes on it. I'm not sure why, but I guess if you want to see the pics, you'll need to use the full browser.
 

Hello

Well-Known Member
Joined
Aug 19, 2013
Messages
11,420
Reaction score
3,400
Location
Raleigh
I'm not sure how well the pot ships either. I'll pass since it may be a PITA to ship to NC. :)
 

Newsman

Well-Known Member
Lifetime Supporter
Joined
Sep 21, 2011
Messages
3,381
Reaction score
643
Location
Cohutta
All kegs are ball lock. Do you guys know how much it should cost to ship cornies these days? What should you use for sufficient packaging?
No clue on the shipping, but I would suggest UPS ground. :) As for packing, just wrap a couple layers of cardboard, maybe some crumpled up newspaper to fill up the space between the cardboard and the corny
 

Ole_Smoky

Well-Known Member
Joined
Feb 15, 2015
Messages
142
Reaction score
20
Location
Fort McMurray
I just shipped 2 cornys from a store and they weren't to bad, 20$ or something. They just threw them in a big box together and that was it.
 

Robpreso

New Member
Joined
Feb 17, 2015
Messages
0
Reaction score
0
I'm interested in the 15 gallon pot. Any chance you'd ship to 80227 if I cover the cost?
 

Latest posts

Top