Ball locks. How do I prevent liquid sneaking into the gas line?
Liquid in gas lines
- Thread starter mavrick1903
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
Don't over-fill the keg and submerge the gas dip tube?
Two things:
- one can cut gas dip tubes down to 1/2" total length which will provide a significant increase in over-fill margin.
- all gas lines should have check valves (aka "backflow preventers") somewhere beyond the regulator. The regulator itself and ideally any manifold should have shut-off valves with integrated check valves...
Cheers!
Two things:
- one can cut gas dip tubes down to 1/2" total length which will provide a significant increase in over-fill margin.
- all gas lines should have check valves (aka "backflow preventers") somewhere beyond the regulator. The regulator itself and ideally any manifold should have shut-off valves with integrated check valves...
Cheers!
You could use one of these.
https://www.williamsbrewing.com/CMB-Gas-Ball-Lock-Fitting-With-Check-Valve-P3358.aspx
https://www.williamsbrewing.com/CMB-Gas-Ball-Lock-Fitting-With-Check-Valve-P3358.aspx
