techpro2004
Active Member
- Joined
- Dec 17, 2019
- Messages
- 28
- Reaction score
- 4
For many years I used a kegerator to make seltzer. but that was very inconvenient with the constant filling of kegs with water and was wastefull of co2 every time I had to refill the kegs. then after a google search for "under the sink sparkling water" I found it, the lilium faucet. It is an ondemand seltzer tap that is tied into my houses water line. I rented a 20lb co2 tank and it works. I did have my local welding store remove the flair fitting from my regulator (shout out to tom from general welding, very helpful) and install an adapter and this fitting from amazon (https://www.amazon.com/dp/B0D459ZFYY?ref=ppx_yo2ov_dt_b_fed_asin_title) for the co2 line. I did have the unit professionally installed by keith's plumbing. he was great and I recommend him very much. In any event, the unit was just installed today and appears to be working correctly. I now have seltzer with out having to carry cases or fill kegs. I only recommend this if you drink a lot of seltzer. My family goes through 10 gal every week or 2. Gas line is a 5/16 push tube and water lines are 1/4 push tube. an excellent buy for my family and if it continues to work I definitely recommend it. It comes with a 2 year warranty so we should be good.
https://liliumfaucet.com/
ps: they really should say seltzer or club soda in the listing in addition to sparkling water as a search for those things did not turn up this product.
https://liliumfaucet.com/
ps: they really should say seltzer or club soda in the listing in addition to sparkling water as a search for those things did not turn up this product.