Kent Systems CO2 quick disconnect help

[Jhuang106]

i recently bought a Kent system Co2 disconnect for my Co2 tank so i can quickly disconnect my Co2 line from the keezer and move the tank to do pressure transfer and other stuff.
https://www.thehomebrewbeeracademy.ca/products/kent-systems-co2-disconnects?variant=16014527529023The CO2 disconnect that i bought comes with 1/4" thread and it doesn't work with Duotight 1/4"FFL x 5/16" fitting.
Any idea how i can make the Co2 quick disconnect work with duotight fitting?

 

[day_trippr]

Can't mix pipe with flare threads. You need a 1/4" FPT x 5/16" (8mm) fitting.

https://www.freshwatersystems.com/products/dmfit-female-nptf-connector-5-16-push-in-x-1-4-nptf
Cheers!

 

[Jhuang106]

Can't mix pipe with flare threads. You need a 1/4" FPT x 5/16" (8mm) fitting.

https://www.freshwatersystems.com/products/dmfit-female-nptf-connector-5-16-push-in-x-1-4-nptf
Cheers!

Thanks man! I didn’t know there are other companies that make “duotight” like fittings. I assume that product will work with 8mm Eva barrier tubing too?

 

[day_trippr]

Both John Guest and DMfit offer numerous fittings compatible with EVABarrier 8mm/(5/16") OD tubing.
Indeed, out of the nearly 50 push-to-connects I have in my brew space most are John Guest, some are DMfit, and just a handful are Duotight...

Cheers!