North Carolina Keggle Set for sale

[Kayakr1988]

E-HERMs HLT keggle, bk keggle and mash tin keggle for sale. I have out grown my current set up and am in need of a bigger equipment. Details on the keggles are below.

Keggle: $115

Cut off top keg with kettle valve weldless 1/2 inch ball valve. It has threaded 1/2 inch female NPT on the outlet and 3/8 inch female NPT threads on the inside.

The keg is very clean on the inside and has normal burner marks. I used this maybe 5 time on the burner before I converted to all electric.

Mash Tun: $150

Cut off top keg with kettle valve weldless 1/2 ball valve. It has threaded 1/2 inch female NPT on outlet and the inside has a 11.75 inch stainless steel sanke keg false bottom connected to the kettle valve.

HLT: $300

E-Herms Hot Liquor tank that features quite a few things. (Everything is weldless fittings)

1 - 5500 watt camco ultra low watt element (you can wire it any way you want but i have it set up with a switchcraft plug)
1 - ~15-20' copper herms coil(made from a old immersion chiller)
1 - Aurber ins RTD sensor with deluxe cord
3 - Kettle Valves (one for drain two for herms)

The HLT does not come with the control panel. You will need to buy one or make one if you don't already have a control panel.

I will take $525 for all three of them.

I am at work now so i cant get detailed images up until tonight. I am located near Wilmington, NC but am willing to ship. EDIT** Shipping will be a very good rate due to my work having a deal with UPS. So shipping shouldn't be to bad.

Let me know if you have any questions.

EDIT: From left to right HLT, Mash tun, Boil Kettle(these are before i converted to E-Herms)

Andy

 

[JUST_BREW_IT]

pm sent

 

[Kayakr1988]

Responded.

 

[Kayakr1988]

Here are some pictures of the mash tun. It has hot water heater wrap that keeps it nice and warm. I only saw it drop 1-2 degrees during a 60 minute mash before I built my HERMs system. Now it stays right on temperature.


Here is the boil kettle which is a little blurry. I can get another image tomorrow.



This is the the HLT which is soaking in PBW since I just brewed. I can get better images once it's clean. Also ignore the tubing inside the keggle.

 

[Kayakr1988]

Here is the other side of the HLT. The spot is where I tried to solder the element to the keg. Whelp it didn't work and I do know how to solder but just not on this scale.

 

[Itsott]

Shipping on hlt to 36345? Did you have to patch the hole where you tried to soldier?

 

[Kayakr1988]

I will check on shipping to your zip code tomorrow but upstate California was at $30 so it should be similar unless you are far from ups hub.

No patch instead of soldering I used a weldless 1 inch stainless steel washer with gasket. It's purely cosmetic. I have brewed 7 batches with the system and never had issues.

 

[Kayakr1988]

Bump I will pay half of shipping in lower 48!

 

[Kayakr1988]

Price drop! And I will pay half of shipping to lower 48! Shipping costs about $30 from East North Carolina to North California.

 

[lotusworker]

PM sent

 

[Kayakr1988]

Replied.

 

[Kayakr1988]

Sale pending on brew kettle.

E-HERMs HLT and mash tun still available.

 

[Kayakr1988]

Brew keggle sold. Still have the HLT and mash tun.

 

[Kayakr1988]

Bump. Eherms HLT and mash tun left. $450 for both shipped in the lower 48.

 

[peggjam]

Mash Tun: $150

I'd be interested in this. PM me with payment info and total with shipping to zip 14885. Thanks.

 

[Kayakr1988]

Peggjam,

Sorry i was just posting that the Mash Tun is sold.

I only have the E-HERMS HLT left.