Kegerator: Is this a deal?

[jpeter31]

Nice older Kenmore Kegerator. Good working condition, ready to be set up, cold. Has all the stuff needed to set it up to include a 7 gallon empty keg. Get a keg and get ready to party.

http://picasaweb.google.com/jnpeter/Kegerator?authkey=DwSveOppmqY

$125, I am having my cousin check it out tonight to see is the tank has been tested recently

Thanks in advance,

Josh

 

[McKBrew]

How much?....

 

[jpeter31]

Updated above....

 

[McKBrew]

Looks like at least a 5# CO2 tank, worth around $75 depending on age. Keg, tap and remainder for $50. Looks like a decent deal to me.

 

[pahiker6]

That looks my Kenmore kegerator. I bought mine maybe three or four years ago, and it's run flawlessly. Very quiet too.

 

[jpeter31]

Any idea mow many ball locks you can fit in there? I was thinking about using picnics taps on the extra since it is a single tower.

 

[Laurel]

you could convert it to a dual tower if 2 cornies can be fit in there.

 

[jpeter31]

Can I modify the existing tower or will I need a new tower?

 

[pahiker6]

Two corny kegs, a 5lb CO2 tank, and a container of Damp Rid fit into mine.

As far as the tower goes, I drilled another hole into the tower to accept a second tap. It becomes a tight fit in the tower with two taps, so you can't use the existing shank. I ordered two elbow shanks from Micromatics.
http://www.micromatic.com/draft-keg-beer/taps-faucets-pid-4329A-3E.html
Still a tight fit, but it works well.

 

[Shay]

You can get a tower adapter which is almost as a new tower and shanks on ebay: http://www.micromatic.com/draft-keg-beer/tools-accessories-pid-DT-2HK.html